Abstract:Some numerical simulations of drained and undrained triaxial tests on granular materials with different initial densities are carried out with the three-dimensional discrete element method. An in-depth particle-scale analysis is performed quantitatively to illustrate the physical mechanism of the shear mechanical behaviors, with a special attention paid to the characteristics of quasi-steady state and critical state. The simulation results show that the initial density and shear drainage condition both have significant effects on the evolution of stress–strain, coordination number, fabric anisotropy factor, force chains and clusters. The chained grains ratio and the mean length of force chains in the specimens are constantly adjusted to bear and transfer the changing external loads. The transitions between small clusters and large clusters are also continually taking place in varying degrees, correlating to volumetric contraction or dilation. For the loose undrained triaxial specimen presenting quasi-steady state during shearing, the coordination number decreases obviously to nearly 4 and then increases again; the chained grains ratio decreases after a slight increase in the initial loading stage, and then begin to increase again after a period of lower value of around 0.285; the volume ratio of small, submedium and medium clusters all first decreases and then increase gradually, meanwhile volume ratio of large clusters increases sharply to as much as 0.28 and then decreases gradually. The macroscopic critical state of granular materials is a comprehensively external manifestation when the microscopic coordination number and mesoscopic force chains and clusters all evolute to a dynamic equilibrium. At the critical state, the deviator stress, void ratio, coordination number, fabric anisotropy factor, and the volume ratio of small clusters and large clusters all manifest a respectively unique linear relationship with the mean effective stress.

Evolution of the force chain structure of partially saturated granular material under triaxial compression conditions

The Influence of Particles' Aspect Ratio on the Shear Behaviour of Granular Materials

Contact Force Distribution and Induced Anisotropy in Granular Materials under Biaxial Test

Incremental behavior of granular soils: a strain response envelope perspective

Complex Network Analysis of Force Chain Structure for Granular Materials under Loading and Unloading Conditions

A Network-Based Investigation on the Strong Contact System of Granular Materials under Isotropic and Deviatoric Stress States

UNDERSTANDING FORCE CHAINS IN DENSE GRANULAR MATERIALS

Force Chains in A Uniaxially Compressed Static Granular Matter in 2D

Investigation on the Friction Mechanism and Its Relation to the Force Chains During Powder Compaction

High-cycle Shakedown, Ratcheting and Liquefaction Behavior of Anisotropic Granular Material with Fabric Evolution: Experiments and Constitutive Modelling

Relation Between Force Chain Quantitative Characteristics and Side Wall Friction Behaviour During Ferrous Powder Compaction

On the Influence of Inter-Particle Friction and Dilatancy in Granular Materials: a Numerical Analysis

Experimental investigation of granular friction behaviors during reciprocating sliding

Correlation Mechanism Between Force Chains and Friction Mechanism During Powder Compaction

3D DEM-based particle-scale analysis of drained and undrained triaxial behaviors of granular materials

Evolution of network architecture in a granular material under compression

Studies on Structural and Mechanical Properties under Isostatic Compression with Large-Scale Discrete Element Simulations

Systematic investigation into the role of particle multi-level morphology in determining the shear behavior of granular materials via DEM simulation

DEM investigation of strain behaviour and force chain evolution of gravel–sand mixtures subjected to cyclic loading

Photoelastic Study Of Force Chains

Mechanical model of evolution of granular matter force chains