Abstract:The paper is aimed to present its methods for preparing four kinds of modified activated carbons under the different temperature conditions to protect the nitrogen atmosphere.For the research purpose,we have examined their surface physicochemical properties in a variety of approaches,such as the application of a gas adsorption analyzer,a Boehm titration,a scanning electronmicroscope (SEM) and the Fourier trans tormed infrared spectroscopy (FTIR).At the same time,we have also done the isothermal adsorption experiments under the conditions with carbaryl being used as the adsorbate.Besides,this paper has also made an exploration of the associated relation between the adsorption power and the physicochemical properties of the activated carbons.The results of the above experimental studies show that the thermal treatment of the activated carbon is in a position to change the physicochemical properties of its surface.For instance,it can promote the decrease of the oxygen content of the carbon surface and the acidic functional groups whereas the surface area and the basic composition of the activated carbons can help to increase themselves significantly,too.Moreover,the SEM analysis indicates that the pore number and volume can be found increased due to the activated carbons expansion with the rising of the temperature.What is more,the analysis results of FTIR experiment prove to be consistent with the results of the Boehm titration.In addition,the adsorption capacity of the activated carbons has been found strongly correlated with their surface area,pore volume,and the surface acidic functional groups while the oxygen content of the surface area and pore volume can help to improve the adsorption capacity of the activated carbons.On the contrary,the acidic functional groups and the oxygen content just behave oppositely.More exactly speaking,the experimental data indicate that the optimal modification temperature should be set up at 600℃.The adsorption behavior of the activated carbons has also been found consistent with the pseudo-second-order kinetic model and that of the Langmuir isotherm.And,finally,the adsorption capacity of all kinds of adsorbents proves to be greater than 8 kJ/mol,signifying that the adsorption process has been dominated by the chemical adsorption.The fitting data of the intraparticle diffusion reveals that the adsorption rate of the activated carbons is not rn()erely controlled in the liquid film diffusion stage.

Quantitative analysis of changes in physical properties of activated carbon with thermal and oxidating treatment

Effect of Nitric Acid Pretreatment on the Properties of Activated Carbon and Supported Palladium Catalysts

Nitrogen Doping of Activated Carbon Loading Fe2O3 and Activity in Carbon-Nitric Oxide Reaction

Effect of Nitrogen Doping on the Reduction of Nitric Oxide with Activated Carbon in the Presence of Oxygen

Preparation and performance of coal-based activated carbon based on an orthogonal experimental study

Improvement of Activated Carbon from Jixi Bituminous Coal by Air Preoxidation

On the adsorptive performance of carbaryl onto the activated carbons with the thermal treatment

Adsorption Of Volatile Organic Compounds In Nitrogen Streams On Oxidized Activated Carbon Fibres

SURFACE MODIFICATIONS OF ACTIVATED CARBON AND ITS IMPACT ON APPLICATION

Thermal air oxidation changes surface and adsorptive properties of black carbon (char/biochar)

The comprehensive evaluation model and optimization selection of activated carbon in the O3-BAC treatment process

Experimental Study on the Improvement of Char Physicochemical Properties and Reactivity by Activation Process in CFB

The Influence of Thermal Treatment of Activated Carbon on Its Electrochemical, Corrosion, and Adsorption Characteristics

Study on the Influence of Pre-Oxidation Treatment on Surface Wettability and Supercapacitive Performance of Coal-Based Activated Carbon

An analysis of the carbonization process and volatile-release characteristics of coal-based activated carbon

Performance optimization and kinetic analysis of HNO3 coupled with microwave rapidly modified coconut shell activated carbon for VOCs adsorption

The influence of particle size and precursor material on activated carbon catalytic ozonation

STUDIES ON THE OXYGEN-CONTAINING GROUPS OF ACTIVATED CARBON AND THEIR EFFECTS ON THE ADSORPTION CHARACTER

The Effect of Oxidation on Physicochemical Properties and Aqueous Stabilization of Multiwalled Carbon Nanotubes:Comparison of Multiple Analysis Methods

Influence of Chemical Activation Temperatures on Nitrogen-Doped Carbon Material Structure, Pore Size Distribution and Oxygen Reduction Reaction Activity