Abstract:A key issue in ensuring the stability of transportation infrastructure in permafrost regions of the Qinghai–Tibet Plateau (QTP) is to prevent the degradation of the underlying permafrost. Therefore, several cooling methods (such as sun sheds, duct-ventilated embankment, thermosyphon, crushed-rock embankment, and dry bridge) have been developed to stabilize the underlying permafrost and mitigate thaw settlement. In this study, considering climate warming and engineering geologic conditions, a necessity model of cooling methods for transportation infrastructure was proposed. The application features of cooling methods along the Qinghai–Tibet Railway (QTR) in permafrost regions were systematically and comprehensively summarized to validate the model accuracy. The results indicated that the model has satisfactory performance and can determine the necessity index (NI) of cooling methods in a certain area. Based on the NI values, convenient application criteria for cooling methods were proposed. Specifically, the transportation infrastructure can be constructed without cooling methods in regions where the NI is less than 1.088. The results indicated that approximately 97% of the regions (NI < 1.088) in the study area are located in talik and low-temperature and ice-poor permafrost regions. Therefore, NI = 1.088 was determined to be a reasonable boundary value for deciding whether to apply cooling methods. Finally, the reliability of the criteria was validated by analyzing the settlement data of six typical embankment sections. This model can improve the reasonableness of the decision-making process of cooling method selection during the design and construction of transportation infrastructure, not only in the Qinghai–Tibet engineering corridor but also in a wide region of the QTP.

Simulation Analysis on Cooling Effectiveness of Engineer Measures for Subgrade of Qinghai-Tibet Expressway

Numerical simulation analyses of artificial upper table and residual thawed layer for embankment of Qinghai-Tibet Railway in the permafrost region

Performance and reinforcement of air-cooled embankments traversing degrading permafrost of the Qinghai-Tibet Plateau

Cooling performance and deformation behavior of crushed-rock embankments on the Qinghai-Tibet Railway in permafrost regions

Parameter sensitivity analyses of influence on thermal regime of embankment in Permafrost Regions along the Qinghai-Tibet Engineering Corridor

Application of the cooling measures in the highway roadbed in permafrost regions of the Qinghai-Tibet Plateau

Evaluation on the stability of expressway embankment combined with L-shaped thermosyphons and insulation boards in warm and ice-rich permafrost regions

Thermal regime of paved embankment in permafrost regions along the Qinghai-Tibet Engineering Corridor

Study on thermal performance of novel asymmetric crushed-rock-based embankment on the Qinghai-Tibet Railway in permafrost region

Numerical Investigation of the Temperature Field of a New Convection-Intensifying Composite Embankment in Permafrost Regions

Prediction of Permafrost Subgrade Thawing Settlement in the Qinghai–Tibet Engineering Corridor under Climate Warming

Innovative designs of permafrost roadbed for the Qinghai-Tibet Railway

Cooling Effects of Interface Heat Control for Wide Permafrost Subgrades

Prediction of temperature field of embankment in permafrost region of Qinghai Tibet railway

Long-Term Thermal Regimes of Subgrade under a Drainage Channel in High-Altitudinal Permafrost Environment

Thermal Control Performance of the Embankment with L-shaped Thermosyphons and Insulations along the Gonghe-Yushu Highway

Numerical simulation for vibration-induced settlement and permanent deformation accumulation in permafrost subgrades of the Qinghai-Tibet Railway

Cooling Subgrade Effectiveness by L-Shaped Two-Phase Closed Thermosyphons with Different Inclination Angles and XPS Insulation Boards in Permafrost Regions

Thermal control mechanism of ventilated-closed block layer composite embankment of expressway in warm permafrost regions

Necessity of cooling methods for transportation infrastructure construction in permafrost regions of Qinghai–Tibet Plateau

Cooling Effect of a Composite Embankment for Wide Expressways in Permafrost Regions: a Three-Dimensional Numerical Analysis