Abstract:The compact design of the marine nuclear power reactor results in a significant reduction in the size of the main equipment,particularly the steam generator.The primary steam-water separator is the core component in this regard.The swirl vane separator is the primary separator in the steam-water separator,responsible for more than 80％of the steam-water separation task.The performance of the marine nuclear power system directly affects its safety and economy.The primary focus of this study centered on the swirl vane separator,employing the Euler-Euler two-phase flow model in conjunction with the RNG k-e turbulent flow model.Furthermore,an additional inertia force resulting from the rolling motion was integrated into the momentum equation as a source term using user-defined functions(UDF).The impact of varying gravity components was considered,leading to the development of a three-dimensional numerical computational model to analyze the flow and separation of steam and water within the separator.The impact of varying rolling angle and rolling period on the flow properties and operational efficiency of the separator was methodically investigated.The results indicate that the turbulent mixing of the steam-water two-phase fluid within the separator is enhanced by the rolling motion,leading to a chaotic pressure field,velocity field,and distribution of liquid volume fraction.The critical state is observed when the rolling angle reaches 40° and the rolling period is 2 s.This critical state causes fluid backflow in different parts of the separator,greatly affecting the effectiveness of separating the two-phase flow.The additional inertia force from the rolling motion results in periodic pressure and velocity fluctuations within the separator,with a phase delay of one-quarter period compared to the separator's motion.In the near-wall region of the separation cylinder,the liquid volume fraction reaches its peak when the separator is at its maximum inclination angle.The periodic changes in separation efficiency follow a sinusoidal pattern.Before reaching the critical condition,the variation in separation efficiency corresponds with the rolling motion of the separator.The influence on the separation performance becomes more pronounced with higher rolling magnitude and shorter rolling period.

Influence of spoiler on overturning angular rate of submunition

Modeling and Simulation of Aerial Dispersion on Piston Dispersal Mechanism

Study on Micro Recoil Mechanism of the Weapon with a Nozzle and Two Chambers Separated by a Partition

Experimental investigation on the aerodynamics and flow patterns of a 5:1 rectangular cylinder with spoilers

Study on Supersonic Jet Control with Spoiler Using Lagrangian Coherent Structures and Dilatation Gradient

Recoil Reduction Design of Gas-Controlled Side-Jet Gun Based on Bifurcated Two-Phase Flow Model

Numerical Simulation of the Two-phase Flow of a Constant-pressure Rear-spray Low Recoil Weapon with Two Chambers

The Numerical Simulation of the Interference Flow Field of Submunition Separation Processes from Dispenser

Ballistic Modeling and Numerical Simulation of Cluster Bomb with Piston Dispensing and Guiding Tube

Experiment and instantaneous driving simulation of explosion dispersion process of central tube for submunition

Numerical and experimental study of the effects of tangential to axial velocity ratio and structural parameters inside the nozzle on spray characteristics

Interior ballistic two-phase flow model and its calculation for a mixed charge structure

Numerical Study of Local Scour around a Submarine Pipeline with a Spoiler Using a Symmetry Boundary Condition

Influence of an Axial Flow on the Near-Field of Axisymmetric Dissemination of Liquid

The mechanism of liquid dispersing from a cylinder driven by central dynamic shock loading

An improved physics-informed transition-turbulence model for asymmetric transition over supersonic rotating projectiles

Improved-delayed-detached-eddy Simulations of Sawtooth Spoilers Control Before a Supersonic Weapon Bay

Parametric study on the sonic transverse jet in supersonic crossflow and analysis of the jet-crossflow interaction instability

Numerical Simulation Study on Swirl Vane Separator under Rolling Motion Condition

Numerical Simulation of Blade Spoiler Effect on Wind Turbine Performance

Numerical Investigation on Mechanism of Swirling Flow of the Prefilming Air-Blast Fuel Injector