Abstract:The antiwear properties of tribofilms formed on steel surfaces lubricated with various multi-component lubricants were investigated at an elevated temperature and under load-speed conditions conducive to sliding in the boundary lubrication regime. The lubricants contained base oil, reduced-level (secondary) zinc dialkyl dithiophosphate (ZDDP), and nitrogenous dispersant. The wear resistance of the tribofilms produced from different oil blends was evaluated in the context of the rate of change in the sliding track volume (wear rate for material loss) and the load-bearing capacity, chemical composition, and thickness of the tribofilms. Surface profilometry and scanning electron microscopy were used to quantify the wear performance and detect the prevailing wear mechanisms, whereas X-ray photoelectron spectroscopy elucidated the chemical composition and thickness of the tribofilms. The oil blends without ZDDP did not produce tribofilms with adequate antiwear properties, whereas the oil blends containing ZDDP and dispersant generated tribofilms with antiwear characteristics comparable to those of tribofilms produced from blends with a higher ZDDP content. Although dispersants can suspend oil contaminants and preserve the cleanness of the sliding surfaces, it was found that they can also reduce the antiwear efficacy of ZDDP. This was attributed to an additive-dispersant antagonistic behavior for surface adsorption sites affecting tribofilm chemistry and mechanical properties. Among the blends containing a mixture of ZDDP and dispersant, the best antiwear properties were demonstrated by the tribofilm produced from the blend consisting of base oil, 0.05 wt% ZDDP, and a bis-succinimide dispersant treated with ethylene carbonate. The findings of this investigation demonstrate the potential of multi-component lubricants with reduced-content ZDDP and nitrogen-based dispersant to form effective antiwear tribofilms.

Surface films in reciprocating tribo-pairs with boundary lubrication

Damage of Surface Films Based on Electrical Contact Resistance

Experimental Analysis On Oil Film Properties Of Plane Port Pair In Axial Piston Machine

Dynamics of Tribofilm Formation in Boundary Lubrication Investigated Using In Situ Measurements of the Friction Force and Contact Voltage

Effect of Surface Topography on ZDDP Tribofilm Formation During Running-in Stage Subject to Boundary Lubrication

XPS and ToF-SIMS Analysis of the Tribochemical Absorbed Films on Steel Surfaces Lubricated with Diketone

Surface analysis of iron-based self-lubricating composite under oil lubrication

New insight into tribofilm composition and structure of iron polyphosphate-rich tribofilm from formulated engine oil by ToF-SIMS

Tribological Behaviour of Rare-Earth Lubricating Oils

Tribofilm Formation and Friction Reduction Performance on Laser-Textured Surface with Micro-Grooved Structures

The Theory of the Surface Wettability Angle in the Formation of an Oil Film in Internal Combustion Piston Engines

In-situ tribo-induced formation of superb lubricious carbon-based tribofilms on the catalytical active MoN-Ag film surfaces

Influence of different loads and temperatures on solid lubricant-filled micro-dimples existing on both cylinder liner and piston ring

Tribo-Induced Catalytically Active Oxide Surfaces Enabling the Formation of the Durable and High-Performance Carbon-Based Tribofilms

Competitive Surface Interactions of Critical Additives with Piston Ring/Cylinder Liner Components under Lubricated Breaking-In conditions

Industrial Gear Oils: Tribological Performance and Subsurface Changes

Wear Mechanisms, Composition and Thickness of Antiwear Tribofilms Formed from Multi-Component Lubricants

Research on the Profile Design of Surface Texture in Piston Ring of Internal Combustion Engine

Tribological behavior of sulfonitrided tribofilm generated from non-corrosive dimercaptobenzothiadiazole-based additives as effective boundary lubrication layer

In situ visualization study of tribofilm growth process from magnesium silicate hydroxide nanoparticles

Substrate Surface Energy Effects on a Liquid Lubricant Film at Nanometre Scalesubstrate Surface Energy Effects on a Liquid Lubricant Film at Nanometre Scale