Abstract:Alloy 2060, a new generation of aluminum–lithium (Al-Li) alloy, is widely used for aviation structural parts due to its high-specific strength and high-specific stiffness. However, poor formability of Al-Li alloy is commonly exhibited at room temperature. In this paper, the formability of Al-Li alloy 2060 was studied under the conditions of elevated temperatures. The Marciniak–Kuczynski (M–K) model was developed to effectively predict the forming limit curves (FLCs) under hot stamping conditions. Firstly, the hot tensile test was conducted to investigate the high-temperature deformation behaviors, and the Fields–Backofen equation was calibrated to represent the flow stress of the alloy. Then, the isothermal hemispherical punch tests were proposed to obtain the FLCs of Al-Li alloy 2060. Finally, the FLC predicted by the M–K model was input into the deep drawing finite element simulation model to verify the accuracy of the prediction results and predict the possible fracture of the hot stamping parts. The cup-shaped deep drawing test and the thin-walled shell part hot stamping test were carried out to verify the accuracy of the FLCs and the formability of the Al-Li alloy 2060. The results show that the true stress increases with the strain rate increasing and decreases with the temperature increasing. The established M–K model can accurately predict the FLCs of alloy 2060. It is also found that the initial thickness imperfection factor f0 is an important parameter that determines the change of FLC. Comparing the experimental and simulation results, it is concluded that the established M–K model would be adaptable in the FE simulation to estimate if the fracture of parts occurs. The simulation model considered the FLC can predict the fracture, thinning, and wrinkle of the parts. The stamping depth increases with the deformation temperature increasing and the blank holder force decreasing.

Research progress of the prediction method for thermal formability of high strength steel

A Method for Prediction of Forming Strain for Cold Stamping Formed Head Made of S30408 Austenitic Stainless Steel

Theoretical Prediction of High Strength Steel 22mnb5 Forming Limit in High Temperature Based on M-K Model

Predictions of the Mechanical Properties and Microstructure Evolution of High Strength Steel in Hot Stamping

Formability Prediction of Advanced High Strength Steel with A New Ductile Fracture Criterion

Damage failure prediction study of carbon fiber metal laminates in hot stamping process

Investigation of the Hot-Stamping Process for Advanced High-Strength Steel Sheet by Numerical Simulation

Analysis of Phase Transformation Simulation and Prediction of Phase Distribution in High Strength Steel in Hot Stamping

Research on Hot Stamping of Square Cup for Advanced High Strength Steel by Numerical Simulation

Forming limit of hot-rolled high-strength steels considering sheet thickness effect

FEM model optimization study of mechanical properties and material selection in stamping process

Hot Stamping Forming Processes and Experiments of 22mnb5 Ultra-high Strength Steels

Experimental and Numerical Determination of Hot Forming Limit Curve of Advanced High-Strength Steel

Hot forming technology of automotive high strength steel sheet stamping part

Numerical simulation of hot stamping for high strength steel

M–K Ductile Damage Theory Predicts Formability of Stainless Steel Ultra-Thin Strips in Stamping

Stamping Failure Analysis of Advanced High Strength Steel Sheet Based on Non-Uniform Local Deformation Through Thickness

Integrated Modelling of Microstructure Evolution and Mechanical Properties Prediction for Q&P Hot Stamping Process of Ultra-High Strength Steel

A Review of Current State and Prospect of the Manufacturing and Application of Advanced Hot Stamping Automobile Steels

Phase Transformation Simulation of High Strength Steel under Hot Stamping Process

M–K model based forming limit prediction of aluminum–lithium alloy 2060 and its application in hot stamping