Abstract:Friction or lubrication process is a typical process of the energy dissipation. It can be reasonably described and speculated by using the entropy increase and dissipative structure theory of the non-equilibrium thermodynamics. In this paper, we model and analyze the typical thin-film lubrication mechanism based on the theory of thermodynamics, by using the interfacial disjoining pressure to characterize the dominant role of the solid-lubricant interaction on a microscale and establishing the lubrication Stribeck curve based on thermodynamic concepts. The concept of entropy production is adopted to describe the lubrication system, which is defined as the sum of multiplications of the thermodynamic forces and flows. Then the variations and the competing relations between the pairs of thermodynamic forces and flows could be used to reveal the different factors dominated in the lubrication system, such as the solid-liquid interaction, the sliding velocity, and the normal load. In this paper, we assume that all the dissipated energy caused by the viscous resistance of lubricant is converted into heat, then the total entropy increase per surface area at the frictional interface is considered, affected by interfacial disjoining pressure and the one-dimensional heat flow. With the entropy increasing analysis of lubrication process, we find that when the entropy production in the steady state becomes minimum, the total energy dissipation due to friction also becomes minimum, which directly indicates the lowest friction coefficient point at the lubrication Stribeck curve. Moreover, when a lubrication system loses its stability slightly from the equilibrium state, self-organization may occur at the solid-lubricant interface, thus resulting in partially ordering interfacial structures, which may indicate the interfacial structures when tribosystem turns from hydrodynamic lubrication phase into thin-film lubrication phase. In the experimental aspect, the location of the lowest friction coefficient point at the Stribeck curve has a very good correspondence to the minimum entropy point predicted by our thermodynamic model, and the lubrication transition process from hydrodynamic phase to thin-film phase can be explained quite well by the theory of dissipative structures when the system loses its stability. Furthermore, a calculation model of the friction coefficient for thin-film lubrication is obtained when considering the dominant contribution of the solid-lubricant interfacial interaction through an equivalent force method. The calculation data correspond well to the experimental results. In summary, thermodynamic model could effectively characterize the lubrication process in mechanism by revealing the involved multi-scale effect, multi-physical effect and nonlinear coupling effect.

Derivation and Application of Energy Equation for the Lubrication with Micropolar Fluids

Numerical Analysis of Journal Bearings Lubricated with Micropolar Fluids Including Thermal and Cavitating Effects

A Novel Investigation of a Micropolar Fluid Characterized by Nonlinear Constitutive Diffusion Model in Boundary Layer Flow and Heat Transfer.

A Study of the Lubricating Effectiveness of Micropolar Fluids in A Dynamically Loaded Journal Bearing (T1516)

Analysis of Fluid-Thermal Coupling in Ferrofluid Bearing Used in High Speed Machines

Thermo-Elasto-Hydrodynamic Characteristics Analysis of Journal Microbearing Lubricated with Rarefied Gas

On the Tribological Characteristics of Dynamically Loaded Journal Bearing with Micropolar Fluids

Thermohydrodynamic Analysis of Journal Bearings Lubricated with Couple Stress Fluids

Thermodynamic Analysis of Lubrication Considering Solid-Liquid Interface Interaction

Thermal Analysis of Lubricated Three-Dimensional Contact Bodies Considering Interface Roughness

Application of Navier-Stokes equation to lubrication

Effective Finite Difference Method to Calculate Lubricating Performances of Ultra-Thin Gas Film of Magnetic Head/disk

Three-Dimensional Thermohydrodynamic Analysis of Circular Journal Bearing

Thermohydrodynamic Study on Journal Bearings Using Finite Element Analysis

Lubrication Model and Dynamic Characteristics of Distributed Liquid Film for Hydrodynamic Bearing

Numerical solution of the boltzmann-based lubrication equation for multi-leaf gas microbearing with different load configurations

An Analytic Model of Oil-Film Force on Hydrodynamic Journal Bearing of Finite Length

Thermohydrodynamic Lubrication Analysis of Misaligned Journal Bearing Considering Surface Roughness and Couple Stress

Prediction on Flow and Thermal Characteristics of Ultrathin Lubricant Film of Hydrodynamic Journal Bearing

The Effect of Energy Accumulation and Boundary Slip on Laminar Flow Between Rotating Plates

A Computer Thermal Model of Mixed Lubrication in Point Contacts