Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. A simplified tire finite element model modeling and simulation method with high efficiency and accuracy is proposed to address the issues of poor efficiency and low accuracy in tire finite element simulation. Firstly, the detailed finite element model of the tire is established, and the viscoelastic material parameters are determined through theoretical analysis and simulation verification. Then, the Hyperelastic material parameters are obtained through cyclic Tensile testing, and finally, the static tire condition test verification is completed. Based on the established detailed finite element model of the tire, the influence of different rubber materials on the dynamic characteristics of the tire is studied. On this basis, simplified friction and structure models are proposed to complete the establishment of a simplified tire finite element model. The simulation results of lateral and longitudinal slip conditions are compared with experimental data by implanting a finite element friction model that considers slip velocity and contact pressure. Through simulation analysis, it was found that the tread compound has a significant impact on the dynamic characteristics of the tire, while other compounds have a relatively small impact. Simplifying the tire finite element model can significantly improve the efficiency of finite element simulation and reduce convergence issues. The comparison accuracy between the finite element model simulation results and experimental data is relatively high, with the average accuracy of longitudinal force, lateral force, and correction moment reaching 89%, 95%, and 81%, respectively. This verifies the correctness and effectiveness of the simplified tire finite element model modeling and simulation method. This method provides certain reference significance for improving the efficiency of tire finite element simulation and providing virtual matching between tires and the entire vehicle.

Sim ulation of Tire-Sand Interactions Based on FEM/DEM

Application of the FEM/DEM and Alternately Moving Road Method to the Simulation of Tire-Sand Interactions

Discrete Element Modeling of Sand Behavior in a Biaxial Shear Test

Numerical Simulations of the Interactions Between a Pneumatic Tire and Granular Sand by 3D DEM-FEM

Analysis of Rigid Tire Traction Performance on a Sandy Soil by 3D Finite Element–discrete Element Method

DEM–FEM Simulation of Tire–sand Interaction Based on Improved Contact Model

Numerical Simulation of Rigid Wheel Running Behavior on Sand Terrain

An Efficient GPU-based ALE-DEM Coupling Method for Tire–sand Interaction Dynamics

An Efficient 3D DEM-FEM Contact Detection Algorithm for Tire-Sand Interaction

Calibration and Validation of DEM-FEM Model Parameters Using Upscaled Particles Based on Physical Experiments and Simulations

A GPU-based DEM-FEM Computational Framework for Tire-Sand Interaction Simulations

Analysis of Travel Performance of Pneumatic Tire on Unpaved Road by Discrete-finite Element Method

Research on simplified tire finite element modeling and simulation method

A micromechanical investigation of sand–rubber mixtures using the discrete element method

Calibration of DEM-FEM Model Parameters for Traction Performance Analysis of an Off-Road Tire on Gravel Terrain

Numerical simulation of tire steering on sandy soil based on discrete element method

Improving the 3D Finite-Discrete Element Method and Its Application in the Simulation of Wheel–Sand Interactions

Tire cornering simulation using finite element analysis

Simulation and Visualized Measuring of the Contact Area of a Steady-rolling Tire

3D-DEM Simulation and Post-Process Method of Wheel-Terrain Interaction for Planetary Rovers

Tire-Pavement Interaction Simulation Based on Finite Element Model and Response Surface Methodology