Abstract:In most industrial sectors, large coal-fired boilers are a source of carbon and pollutant emissions, so it is important to carry out combustion adjustment and optimize energy-saving operation of coal-fired boilers. Traditional combustion adjustment relies on human intervention, but manual adjustment is difficult to achieve synergistic optimization of NOx and thermal efficiency at the same time, so there is a large adjustment space for boiler combustion optimization. Artificial intelligence technology can explore the potential of combustion optimization from boiler operation data. Currently, the boiler combustion optimization method based on supervised learning modeling and optimization algorithms has good optimization effect and high application value. At present, there are problems such as the combination of dynamic model and optimization algorithm is difficult and the optimization time is long, etc. This paper adopts feature classification and multi-model coupling to build a static-dynamic composite prediction model of boiler performance indicators, dynamic prediction model of boiler thermal efficiency and nitrogen oxides (NOx) is established by using long short-term memory (LSTM) and one-dimensional convolutional neural network (1D_CNN). The model is categorized into static and dynamic models based on the input features, and the dynamic model is coupled with BP neural network to establish a static-dynamic composite prediction model and further couples the proximal policy optimization (PPO) reinforcement learning algorithm to establish a boiler in-place optimization strategy. Through the experimental validation of 5619 test cases, the strategy successfully achieves 63.5 % co-optimization of NOx and thermal efficiency, with thermal efficiency increase ranging from 0-0.61 % and NOx reduction ranging from 0-65 mg/m3. Meanwhile, comparing the optimization effect of the PPO algorithm with that of the genetic algorithm (GA) shows that the PPO strategy has a more significant effect on NOx reduction while keeping the thermal efficiency optimized. Moreover, the online decision-making speed of the PPO strategy is much higher than that of the GA, with an average time consumption of only 0.015 s, while the GA requires about 3 min for a single optimization, which indicates that the combustion optimization strategy of the PPO algorithm coupled with the composite prediction model has a significant advantage in realizing high-efficiency and accurate optimization.

Online Optimization of Cracking Furnace Based on Advanced PSO Algorithm and Neural Network Ensembles

Parameter Estimation of Catalytic Cracking Model Using PSO Algorithm

Multi-objective Optimization of Operating Parameters Based on Neural Network and Genetic Algorithm in the Blast Furnace

Combustion Optimization Study of Pulverized Coal Boiler Based on Proximal Policy Optimization Algorithm

Hybrid-Model-Based Intelligent Optimization of Ironmaking Process

Improved Optimization Method for Blast Furnace Based on Robust Soft Sensor and Process Knowledge

Real-time optimization of cracking furnace systems's load distribution

Multiple Learning Particle Swarm Optimization with Space Transformation Perturbation and Its Application in Ethylene Cracking Furnace Optimization

A hybrid algorithm based on differential evolution and group search optimization and its application on ethylene cracking furnace

Predictive modeling of strip temperature in continuous annealing furnace: An improved optimization algorithm

Boiler combustion optimization based on ANN and PSO-Powell algorithm

Multi-objective Modeling and Optimization for Scheduling of Cracking Furnace Systems

Optimization of Low-Pressure Die Casting Process with Soft Computing

Load-Shifts Optimization Of Combined-Cycle Power Plant With Dynamic Particle Swarm Approach

An Application of the Particle Swarm Optimization on the Gasoline Blending Process.

Research on Section Temperature Field Reconstruction in Furnace Based on Hybrid PSO-Powell Algorithm

A Study of Optimization Strategy for Furnace Temperature Control System Based on Particle Swarm Optimization (PSO)

Modeling and optimization for ethylene cracking furnace systems scheduling with consideration of changing feedstock

Multiobjective Optimization of Ethylene Cracking Furnace System Using Self-Adaptive Multiobjective Teaching-Learning-based Optimization

Multiobjective Optimization of CO 2 Emission and Net Profit for a Naphtha Cracking Furnace Using a Deep Neural Network with a Nondominated Sorting Genetic Algorithm

Modeling and optimization of cracking process for LPG feedstock