Abstract:The electric field calculation is important to the structure optimization of the disconnecting switch, the control of the corona loss, the audible noise, and the radio interference level. Consequently, the ANSYS software was used to calculate the AC and DC electric field distribution and to determine the value and the position of the maximum electric field. On the basis of static electric field theory, in the DC field calculation, the steady conduction current field theory was used to calculate the potential distribution on the surface of the disconnector. When the resistivity ratio between different materials was beyond 10 orders of magnitude, the problem of divergent values solved by ordinary finite element method would occur. Therefore, it was proposed that, according to the structure feature of the disconnector, the floating potential of the metal connectors was obtained by calculating the resistances of the supporting insulators firstly. Then the surface potential of the insulators was derived, which was in linear relation with the surface distance. Secondly, with the surface potential distribution of the disconnector, the ANSYS sub-modeling technique was adopted to calculate the electrostatic field distribution in the air domain. Hence, the coupling between conduction current field and static electric field was achieved. Finally, the AC and the DC field results were summarized and compared. The DC field simulation results show that the potential distribution at the interface between disconnector and air domain is continuous, which verifies proposed method.

The simulation of electric field and flow field in load switch for capacitor banks switching

Simulation On Power Characteristic Of Uhvdc During Commutation Failure And Dc Block

The design scheme of 126 kV load switch for capacitor banks switching

Simulation Calculation of Electric Field Distribution and Capacitance of V/N Spark Switch

Mathematical Modeling and Simulation of Flow Field of Switching Process of On-Load Tap Changer for Large Capacity Transformer

Simulation Study of Series Resonance Type Fault Current Limiter

Simulation of initial discharge courses of a pseudo spark switch

THE COUPLED FIELD-CIRCUIT TRANSIENT SIMULATION OF MOTOR APPLIED WITH A NEW SINGLE V-A CHARACTERISTIC OF IDEAL SWITCHES

Simulation of AC and DC Electric Field for 800 kV Grade High Voltage Disconnector

Transient Simulation Model for Electric Field Distribution in Cable Joint

Simulation of Internal Electric Field of High-voltage Metal-enclosed Switchgear and Influencing Factors

Simulation analysis of electromagnetic-temperature field coupling of medium voltage switchgear based on finite element method

The Research of Electric Arc Simulation in Low Voltage Switching Devices

Electric field numerical analysis and structure optimization of grounding switch in GIS based on finite element analysis

Research of Simulation Technique of Electric Arc in Air Switch and Its Applications

Electromagnetic-Thermal-Flow Field Coupling Simulation of 12-Kv Medium-Voltage Switchgear

Research on Oil Chamber Flow in On-load Tap-changer Switching Process with CFD

Simulation of Arc Motion in Air Switching Devices Taking Ferromagnetic Material into Accout

Studies of Modeling and Simulation Method of Temperature Rise in Medium-Voltage Switchgear and Its Optimum Design

Study on Internal Electric Field Simulation Analysis and Local Optimization Strategies of High Voltage Metal Enclosed Switchgear

Nonlinear Switching Transient Field Simulation of Cable Joint Without Residual Charge