Abstract:Though Nb2O5 has great potential as a high-power anode, it still performs poorly because of its structural issue and insufficient electronic/ionic conductivity. Hence, an effective strategy that combines ion doping and structure regulation boosting the electrochemical properties of Cu x Nb2–x O5–3/2x (x = 0, 0.1, 0.2, and 0.3) toward high-power Li-ion batteries is demonstrated. A more open-tunnel-like crystalline skeleton comes from the Wadsley–Roth shear structure with enhanced structural stability, and larger lattice parameters are realized by Cu2+ doping, which infers rapid Li+ transport. The structure regulation of Cu x Nb2–x O5–3/2x was carried out by the accurate control of the Cu2+ doping amount to search for the best crystal fault tolerance. The electronic properties of Nb2O5 with different Cu contents are revealed by DFT calculations. Meanwhile, benefiting from the reinforced intrinsic electronic/ionic conductivity, Cu0.2Nb1.8O4.7 presents the prime electrochemical property. At 20 C, the specific capacity can reach 201.22 mA h·g–1 and maintain a capacity retention of 109.4% after 3000 cycles. The apparent Li+ diffusion coefficient of Cu0.2Nb1.8O4.7 can achieve 1.11 × 10–12 cm2·s–1, which is 2 orders of magnitude higher than that of Nb2O5. These results provide tremendous support for the widespread application of Cu x Nb2–x O5–3/2x .

Effect of Cu2 O on performance of lithium ion full battery with electrode of CuO nanostructure films

Flower-like CuO film-electrode for lithium ion batteries and the effect of surface morphology on electrochemical performance

Nanostructured hybrid cobalt oxide/copper electrodes of lithium-ion batteries with reversible high-rate capabilities

Controllable Synthesis of CuO and Its Electrochemical Performances As Anode in Li-ion Batteries

Fabrication and characterization of Fe3O4-based Cu nanostructured electrode for Li-ion battery

Fabrication of CuO film with network-like architectures through solution-immersion and their application in lithium ion batteries

Fabrication of CuO/C Films with Sisal-Like Hierarchical Microstructures and Its Application in Lithium Ion Batteries

Synthesis of Copper Oxide Nanostructures Via a Composite-Hydroxide-mediated Approach: Morphology Control and the Electrochemical Performances As Anode Material for Lithium Ion Batteries

Copper Oxide Hierarchical Microspheres Grown on Copper Foil and Their Enhanced Performance As Anodes for Li-ion Batteries

Synthesis of different CuO nanostructures from Cu(OH)2 nanorods through changing drying medium for lithium-ion battery anodes

Electrochemical Investigation on Nanoflower-Like CuO/Ni Composite Film As Anode for Lithium Ion Batteries

The Synergetic Effect Induced High Electrochemical Performance of CuO/Cu2O/Cu Nanocomposites as Lithium-Ion Battery Anodes

The Effect of Crystal Face of Fe2O3 on the Electrochemical Performance for Lithium-ion Batteries

Thermal Oxidation Synthesis of CuO/Cu Anode Materials and the Structure and Electrochemical Properties

Insight into the Effect of Cu 2+ Doping on Cu x Nb 2– x O 5–3/2 x for High-Power Lithium-Ion Batteries

Facile synthesis of Fe-incorporated CuO nanoarrays with enhanced electrochemical performance for lithium ion full batteries

Synthesis of Sheaf-Like CuO from Aqueous Solution and Their Application in Lithium-Ion Batteries

Effects and Mechanism of ITO and ZnO Substrate on Surface Morgraphology and Structural of Electrodeposited Cu2O Thin Films

Cu Nanoparticles Derived from CuO Electrodes in Lithium Cells

Effect of TiO 2 -Coating on Structure and Electrochemical Performance of LiCo 0.2 Ni 0.4 Mn 0.4 O 2

A Comparison of Anodically Grown CuO Nanotube Film and Cu 2 O Film As Anodes for Lithium Ion Batteries