Abstract:Since the period required for testing the atmospheric corrosion of steel is long, most studies have focused on the corrosion behavior in less than three years, making exploring long-term atmospheric corrosion particularly valuable. This study investigates the corrosion behaviors, corrosion models, and mechanical properties of Q235 welded steel pipes collapsing due to corrosion after 25-year service in an urban industrial atmospheric environment using SEM, XRD, electrochemical methods, 3-D noncontact surface profilometry, and static tensile testing. The typical morphologies of & alpha;-FeOOH, & gamma;-FeOOH, and Fe3O4 and the effect of the content of various corrosive materials on the corrosion rate of the steel pipes are identified and analyzed. Then, the influence of different corrosion degrees on the mechanical properties of the steel pipes is examined by considering the morphologies of the rust pits. The results show that the wetting-drying cycles affect the structures of the rust layers and their protective properties. The rust layers on the sheltered surface are thicker but less protective than those on the exposed surface. In the wet state, FeSO4 accelerates ion transfer, while Fe3O4 facilitates electron transfer. These processes collectively contribute to the corrosion of Q235 steel. Moreover, as the time-of-wetness of the rust layers on sheltered specimens increases, the corrosion rate of Q235 steel also accelerates. The corrosion model combines pitting and uniform corrosion and gradually changes from predominated by pitting to thickness as the corrosion degree increases. The corrosion morphology impacts the mechanical properties of the welded steel pipes, and the influences of the thickness loss and maximum rust pit depth on these properties are profound.

Stray current corrosion behavior of Q2 3 5 carbon steel grounding material

Stray Current Corrosion of Q235 Steel in Hainan Soil

Corrosion Behaviors and Mechanical Properties of Q235 Steel Pipes Collapsing Due to Corrosion after 25-Year Service in Urban Industrial Atmospheric Environment

Study on alternating current corrosion of carbon steel grounding electrode

A Simulation Study Of The Direct Current Corrosion Characteristics Of Carbon Steel Grounding Electrode With Ground Lead

Effect of DC Stray Current on Electrochemical Behavior of Low-Carbon Steel and 10%cr Steel in Saturated Ca(OH)2 Solution

Stray Current Corrosion Behavior of Steel in Soil Environments

Study on Corrosion Behavior of Copper-Clad Steel Bars with Unclad Two-End Faces for Grounding Grids in the Coastal Soil

Study on the Corrosion Characteristics of Grounding Materials in Acid Red Soil

Electrochemical and Stress Corrosion Mechanism of Submarine Pipeline in Simulated Seawater in Presence of Different Alternating Current Densities

Comparative Study on the Corrosion Behaviours of High-Silicon Chromium Iron and Q235 Steel in a Soil Solution

X80 Steel Corrosion Induced by Alternating Current in Water-Saturated Acidic Soil

Influence of Current on Soil Corrosion of Galvanized Steel of Grounding Grids

Mechanical Properties and Corrosion Mechanism of Steel Fiber Reinforced Concrete (SFRC) Subjected to Stray Current

Study On Atmospheric Corrosion Behavior Of Q235 Galvanized Steel In Substation

Effect of Electrochemical Potential and Chloride Concentration on Stress Corrosion Cracking Behavior of 23co14ni12cr3mo Ultra-High Strength Steel in NaCl Solution

Corrosion Behavior of Q235 in Simulated Natural Environment by Electrochemical Technology

Galvanic Effect and Alternating Current Corrosion of Steel in Acidic Red Soil

Study of Substation Ground Grid Protection under Stray Current Interference

Research on AC corrosion behavior and corrosion product film evolution of X70 steel under the combined action of AC interference and CP

Assessing Stray DC and AC Current-Induced Corrosion in Steel Fibre-Reinforced Concrete (SFRC) in Railway Tunnelling Construction