Abstract:Inverse opal ceria (CeO2) films and powders, exhibiting three-dimensional ordered macroporous (3DOM) structures and a photonic band gap (PBG) in the visible region, were successfully fabricated using the colloidal crystal template approach. Colloidal crystals templates, comprising polymethylmethacrylate (PMMA) spheres of diameter similar to 325 nm arranged on a face-centered cubic (fcc) lattice, were prepared by self-assembly from aqueous colloidal suspensions of PMMA spheres. After drying, the interstitial spaces in the PMMA colloidal crystals were filled with a ceria sol-gel precursor, and then the resulting structure calcined at 400 degrees C to remove the polymer template. The ceria inverse opals obtained were characterized by SEM, XRD, BET, porosity, and UV-vis transmittance measurements and showed fcc ordering of macropores (diameter around 240 nm) within a CeO2 nanocrystal matrix. The CeO2 volume fraction in the inverse opals was 17-18 vol %, and its surface area was 51 m(2) g(-1). Both the PMMA colloidal crystals and CeO2 inverse opals. behaved as 3-dimensional photonic crystals, with PBGs at 877 and 485 nm, respectively. Filling the macropores of the CeO2 inverse opal with solvent caused a redshift in the position of the PBG, with the magnitude of the shift being directly proportional to the refractive index of the. solvent. Refractive index sensing with a sensitivity of n = 0.001 or better is achievable using inverse opal CeO2 thin films. Inverse opal CeO2 Powders showed improved thermal stability at 800 degrees C compared to non-networked ceria nanoparticles of similar initial crystallite size and surface area, suggesting that inverse opal architectures may be useful in applications where retention of large surface area during high temperature operation is important (e.g., heterogeneous catalysis).

Study on silica inverse opal photonic crystal on polyester fabrics and its structure

Physical and Optical Properties of Silica/Polymer Nanocomposite Inverse Opal

Study on the formation of three-dimensionally ordered SiO2 photonic crystals on polyester fabrics by vertical deposition self-assembly

Synthesis Of Silica Microspheres-Inspired By The Formation Of Ice Crystals-With High Homogeneous Particle Sizes And Their Applications In Photonic Crystals

Fabrication of Silicon Inverse Opal Photonic Crystal with A Complete Photonic Band Gap in Mid Infrared Range and Its Optical Properties

Fabrication of high-quality silica photonic crystals on polyester fabrics by gravitational sedimentation self-assembly

Synthesis and Optical Properties of Durable Opal Photonic Crystals with High Crystalline Quality

Fabrication and property of polystyrene opaline heterostructure

Physical and Optical Properties of Inverse Opal CeO2 Photonic Crystals

Preparation and Characterixation of Nanocrystalline Ag Doped Silica Inverse Opal Films

Preparation of 3D Se-SiO_2 Photonic Crystals

Study on Self-assembly Process of Photonic Crystal on Silk Fabric

Fabrication and optical properties of Nb2O5 inverse opal photonic crystals by PS opal template

Preparation and Application of Triplethiophene Derivative Functionalized SiO2 Inverse Opal Photonic Crystal Fluorescent Films

Study of the spectra of silica colloidal crystals with assembled silver obtained from a photolysis method

Fabrication and Characterization of Monolithic 3D Amorphous Silicon Inverse-opal Photonic Materials with Magnesiothermic Reduction at a Lower Temperature

Self-assembly of Sub-micrometer Spheres into Linear Arrays of Silica Photonic Crystals

Rapid Fabrication of SiO2-PHEMA Photonic Crystal Hydrogel Composite Microspheres

Study on the Effects of the Characteristics of Textile Substrates on the Photonic Crystal Films and the Related Structural Colors

Preparation and Characterization of Nanocrystalline ZnS/ZnO Doped Silica Inverse Opals

Micro-Mould Method for Self-Assembling Three-Dimensional Opal Photonic Crystals