Abstract:The modification of eutectic silicon is of general interest since fine eutectic silicon along with fine primary aluminum grains improves mechanical properties and ductilities. In this study, high intensity ultrasonic vibration was used to modify the complex microstructure of aluminum hypoeutectic alloys. The ultrasonic vibrator was placed at the bottom of a copper mold with molten aluminum. Hypoeutectic Al-Si alloy specimens with a unique in-depth profile of microstructure distribution were obtained. Polyhedral silicon particles, which should form in a hypereutectic alloy, were obtained in a hypoeutectic Al-Si alloy near the ultrasonic radiator where the silicon concentration was higher than the eutectic composition. The formation of hypereutectic silicon near the radiator surface indicates that high-intensity ultrasonic vibration can be used to influence the phase transformation process of metals and alloys. The size and morphology of both the silicon phase and the aluminum phase varies with increasing distance from the ultrasonic probe/radiator. Silicon morphology develops into three zones. Polyhedral primary silicon particles present in zone I, within 15 mm from the ultrasonic probe/radiator. Transition from hypereutectic silicon to eutectic silicon occurs in zone II about 15 to 20 mu m from the ultrasonic probe/radiator. The bulk of the ingot is in zone III and is hypoeutectic Al-Si alloy containing fine lamellar and fibrous eutectic silicon. The grain size is about 15 to 25 mu m in zone I, 25 to 35 mu m in zone II, and 25 to 55 mu m in zone III. The morphology of the primary alpha-Al phase is also changed from dendritic (in untreated samples) to globular. Phase evolution during the solidification process of the alloy subjected to ultrasonic vibration is described.

Effect of ultrasonic and electromagnetic fields on solidification structure of hypoeutectic Al -Si alloy

Restraining Solute Segregation of Al–1%Si Alloy in Diverse Physical Field

Structural Evolution of Al–8%Si Hypoeutectic Alloy by Ultrasonic Processing

Microstructures of hypereutectic Al-24%Si alloy stirred by electromagnetic field

Effects of Rotating Magnetic and Ultrasonic Fields on the Microstructure and Mechanical Properties of Al-8 Wt.% Si Alloy

Ultrasonic Solidification and Microstructural Evolution of Binary Al-12.6%Si Eutectic Alloy

Effect of ultrasonic treatment on microstructures and properties of hypereutectic Al-Si alloys

Influence of Electromagnetic Fields on the Solidification Structure of Al-18% Si Alloy

Effect of Low-Frequency Electromagnetic Field on Microstructure of Hypereutectic Al-Si Alloys

Effect of Ultrasonic Treatment on Microstructures of Hypereutectic Al–Si Alloy

Effects of High Density Ultrasonic Field Coupling on the Microstructures and Properties of Al-Si Alloy

Microstructure and Mechanical Properties of Al-8 pct Si Alloy Prepared by Direct Chill Casting Under Electromagnetic and Ultrasonic Fields

Effect of power ultrasound on microstructural characteristics and mechanical properties of Al 81.3 Sn 12.3 Cu 6.4 monotectic alloy

Effects of pouring temperature and electromagnetic stirring on semi-solid microstructure of hypoeutectic Mg2Si/Al composite

Formation of Hypereutectic Silicon Particles in Hypoeutectic Al-Si Alloys under the Influence of High-Intensity Ultrasonic Vibration

Effects Of Ultrasonic Treatment On Microstructures Of Hypereutectic Al-23%Si Alloy

Microstructure Evolution of Primary Si Phase in Hypereutectic Al-20Si Alloys Prepared by Centrifugal Casting under an Electromagnetic Field

Effect of Outfield Treatment on Structure Refinement of Horizontal Continuous Casting Al-1Si Alloy

Effects of High Intensity Ultrasonic on the Solidification Structure of Al-1Si Alloy

Grain Refinement and Eutectic Solidification Mechanism of Al-Si Hypoeutectic Alloy in Centrifugal Casting with Electromagnetic Field

Refinement Effects of Steady Electric Field on Primary α-Al in Solidification Microstructures of Aluminum Alloys