Abstract:Different types and amounts of steel fibers have varying effects on the improvement of concrete's mechanical properties. In order to identify the most suitable steel fiber types for the practical production of prefabricated pavements and derive a formula to predict and evaluate the mechanical properties based on steel fiber volume fraction, this study conducted experimental research on the physical mechanical properties of concrete using the method of equal volume substitution of coarse aggregate. The influence of steel fiber type and volume fraction on the microstructure and failure mechanism of steel fiber reinforced concrete (SFRC) was analyzed through electron microscopy scanning. The mechanical properties of plain concrete were used as benchmark. The results showed that when the steel fiber volume fractions were 0.6% and 1.5%, the bending and split tensile strengths of milled steel fibers were 3.1% higher than those of hooked-end steel fibers and the compressive strength of SFRC was significantly increased by 13.5%. The comprehensive mechanical properties of wave-shaped steel fibers were inferior to the first two types. Considering the requirements of SFRC in engineering, milled steel fibers are more suitable to be concrete components. This is because the tangling property of the hooked-end steel fibers makes them difficult to be shaped. In contrast, the smooth surface of milled steel fibers exerts a smaller impact on the forming of specimen and they are more economical. The mechanical properties of SFRC improve as the volume fraction of steel fibers increases from 0% to 2%, but start to decline when the volume fraction exceeds 2%. A volume fraction of 0.6% for steel fibers is sufficient to meet the standard for bending and tensile strength in heavy-duty concrete pavements. Finally, the relationship expressions between the compressive strength, flexural strength, and split tensile strength of SFRC and the steel fiber volume fraction were obtained through fitting the experimental data using Origin software.

Experimental research on the mechanical properties of SFRC

Mechanical Properties of SFRC: Database Construction and Model Prediction

The Research of Layer Steel Fiber Reinforced Concrete on Mecha-Nical Properties and Fracture Performance

Experimental Study on Uniaxial Compression of SFRC

Fracture Property of Steel Fiber Reinforced Concrete at Early Age

Experimental research on shear behavior of high-strength SFRC

Experimental Study on Dynamic and Static Mechanical Properties of Steel Fiber Reinforced Concrete

Quasi -static Mechanical Properties of SFRC under Uni -axial Compression

Experimental study on mechanical properties of steel fiber reinforced concrete

Experimental Study on the Tensile Behavior of Steel Fiber Reinforced Concrete

Experiment and Study on SFRC Subjected to Impact Loading

The Effects of Steel Fiber Types and Volume Fraction on the Physical and Mechanical Properties of Concrete

Experimental Study on Macroscopic Mechanical Behavior of SFRC under Triaxial Compression

A Study of Strain-Rate Effect and Fiber Reinforcement Effect on Dynamic Behavior of Steel Fiber-Reinforced Concrete

Meso-Mechanical Simulation of the Mechanical Behavior of Different Types of Steel Fibers Reinforced Concretes

Research on the Fracture Behavior of Steel-Fiber-Reinforced High-Strength Concrete

Mechanical Performance of CFRP Enclosed Reinforced Concrete Beams by Different Shear Reinforcement

Influences of Fiber Content on Properties of Self‐compacting Steel Fiber Reinforced Concrete

Mechanical characterization of SFRC with annealed and galvanized steel fibers by different test typologies

Compressive Strength and Splitting Tensile Strength of Steel Fiber Reinforced Ultra High Strength Concrete (SFRC)

Mechanical performance and numerical simulation of high-performance steel fiber reinforced concrete