Abstract:A theoretical study is conducted on the fracture behavior of a cracked equilateral triangle hole with surface effect subjected to far-field antiplane mechanical load and inplane electric load. A rigorous analytical solution to the stress and electric displacement fields are obtained based on the theory of Gurtin-Murdoch surface model and conformal mapping technique. A closed form solution to the stress intensity factor, the electric displacement intensity factor and the energy release rate at the tip of crack are presented. Numerical examples are provided to reveal the variations of the electroelastic field intensity factors and the energy release rate with the size of triangle hole, the length of crack and the applied mechanical load and electrical load. The major results of the study are as follows: (1) The electroelastic field intensity factors at crack tip are dramatically size dependent when the size of the cracked triangle hole is at nanoscale. The present solution approaches classical electroelastic theory when the length of cracked equilateral triangle hole has large characteristic dimensions. (2) With the increase of the length of crack, the electroelastic field intensity factors first increase rapidly, and then slowly decrease, and finally stabilize. (3) When considering surface effect, the stress and electric displacement intensity factors depend on the applied mechanical-electrical loads, which is different from that of the classical electroelastic fracture theory. (4) The normalized energy release rate increases with the increase of the size of the cracked triangle hole. (5) The influences of the applied mechanical load on the normalized energy release rate depend on whether the applied electrical load is positive or negative. (6) With the increase of the applied electrical load from negative to positive, the normalized energy release rate release rate first increases and then decreases. Very high positive and negative applied electrical loads shield the normalized energy release rate.

CRACK TIP SHIELDING BY MICROCRACKING IN PIEZOELECTRIC MATERIALS

A PENNY-SHAPED CRACK IN AN INFINITE PIEZOELECTRIC BODY UNDER ANTISYMMETRIC POINT LOADS

Exact Solution to the Problem of A Half-Plane Crack in A Transversely Isotropic Piezoelectric Body Subjected to Antisymmetric Tangential Point Forces

Maximal crack tip shielding by microcracking in orthotropic elastic solids

Extended Finite Element Method Analysis For Shielding And Amplification Effect Of A Main Crack Interacted With A Group Of Nearby Parallel Microcracks

Analysis of Mode-I Crack Tip Shielding by Microcracking in Brittle Materials

Crack tip shielding and anti-shielding effects of the imperfect interface in a layered piezoelectric sensor

Phase Field Analysis of Crack Tip Parameters in Ferroelectric Polycrystals under Large-Scale Switching

Mixed mode crack initiation in piezoelectric ceramic strip

MAXIMAL CRACK TIP SHIELDING BY MICROCRACKING IN ISOTROPIC ELASTIC SOLIDS

Fracture Characteristics of a Cracked Equilateral Triangle Hole with Surface Effect in Piezoelectric Materials

Multilayered piezomagnetic/piezoelectric composites with periodic interfacial cracks subject to in-plane loading

Numerical Analysis for A Crack in Piezoelectric Material under Impact

Thermal shock fracture of piezoelectric materials

Surface effects of electroelastic tip fields of multiple cracks emanating from a circular hole

Investigation of the Dynamic Behavior of Two Parallel Symmetric Cracks in Piezoelectric Materials Use of Non-Local Theory

Numerical Analysis of Crack Propagation in Piezoelectric Ceramics

Fracture of piezoelectromagnetic materials

Nonlinear electromechanical interfacial fracture for piezoelectric materials

Intensity Factors for Some Common Piezoelectric Fracture Mechanics Specimens with Conducting Cracks or Electrodes

Crack tip field in piezoelectric/piezomagnetic media