Droplet impingement calculation on complex suface of rotating part

Xiaobin Shen,Zhiqiang Zhang,Guiping Lin,Zuodong Mu,Xueqin Bu

DOI: https://doi.org/10.7638/kqdlxxb-2015.0213

2016-01-01

Abstract:A three-dimensional water impingement model for rotating surface has been established and solved to simulate the process of supercooled water droplet impinging on ice protection surfaces,in which an Eularian method and a single rotating coordinate system were applied.With the single rotating coordinate system,the unsteady cyclically rotating boundary condition was simplified to a steady boundary by introducing the inertial forces;with the Eularian method,the air flow and water droplets flow field were depicted in a one-way coupled form;the Eularian control equations were adjusted in the non-inertial reference system by introducing the Coriolis acceleration and convected acceleration;then a finite volume solver was applied to solve the governing equations of air flow and droplet flow,in which the inertial forces were defined as the source terms of the momentum equation,and the results of velocity and volumetric fraction of air flow and droplet flow were obtained as well as the droplet collection efficiency.With the mentioned method,a rotating model of cowling and blades was simulated for a stationary case and at different rotational speeds.The results show that the rotation has significant influences on the water collection efficiency of the blades.The value of collection efficiency increases with increasing rotational velocity since droplet velocity normal to the surface increases due to the rotation,and the distribution curve shifts to the windward direction;the effect on the cowling is slight,and a distinguishable change of the impingement characteristic has not been caused by the change of the tangential velocity due to the axis-symmetric shape of the cowling.