Analysis of Vortices Formed in Flow Passage of a Five-Bladed Centrifugal Water Pump by Means of PIV Method
Yanping Wang,Hui Yang,Bo Chen,Panlong Gao,Hui Chen,Zuchao Zhu
DOI: https://doi.org/10.1063/1.5099530
IF: 1.697
2019-01-01
AIP Advances
Abstract:Detailed optical measurements for the flow inside rotating passages of a five-bladed centrifugal impeller were performed by particle image velocimetry (PIV). The flow in mid-plane perpendicular to the pump axis was measured at 1400 r/min rotation speed. Seven flow rates, namely, 1.2, 1.0, 0.8, 0.6, 0.4, 0.2, and 0 Qd, were surveyed. The averaged PIV velocity maps and streamline were analyzed. Results show that when flow rate decreases to 0.8 Qd, the flow separation forms initially at the blade suction side in passage 1. With decreasing of flow rate, the flow separation appears in much more passage, the separation region enlarges, and the flow at the pressure side begins to form flow separation. All passages are gradually occupied by the vortices generated by flow separation, until the passages are finally blocked. The scale of vortex along the stream-wise direction at the suction side is larger than that at the pressure side, whereas the scale of vortex along the span-wise direction is smaller than that at the pressure side. With the decrease in flow rate, the scales of vortices at the suction and pressure sides increase, and the vortices at both sides move toward the inlet and outlet, respectively. Moreover, the effect of vortices on the tangential and radial components of the absolute velocity was analyzed.