ANALYTICAL SOLUTION FOR MORTISE-TENON END WOODEN BEAM SUBJECTED TO UNIFORM LOAD

Lei ZHANG,Na YANG

DOI: https://doi.org/10.6052/j.issn.1000-4750.2016.02.0118

2017-01-01

Abstract:In order to solve the stress distribution of mortise-tenon end wooden beams subjected to uniform loads in traditional Chinese architecture,the analytical solution for a simply supported wooden beam,hinged wooden beam and fixed-end wooden beam were first developed by employing the half-inverse method.Based on the above results,the stress distribution for mortise-tenon end wooden beams was derived by introducing two parameters characterizing the semi-rigid nature of the joints.These two parameters were analyzed later using a simple example to assess their influence on the distribution of bending stress within the beam.The stress distribution of mortise-tenon end beams was also compared with beams with other boundary conditions.Results show that the shear stress within the wooden beam,especially for beam in mortise-tenon end,should not be neglected.Lastly,it was pointed out that the stiffness of the mortise-tenon joint changes with increasing load and a method for determining semi-rigid parameters under this condition was given as well.