Abstract:Ice adhesion is important when designing aircraft anti-icing/de-icing systems. Major and minor grooves are common in the skin of aircraft. However, the effects of millimeter-scale grooves on ice adhesive strength have not been given due attention. Specimens with varying depths, widths, and numbers of grooves were fabricated by machining to investigate the ice adhesive characteristics of large-sized grooved aluminum surfaces. After the ice cube was frozen on the surface using a silicon mold, the adhesive force was measured using a self-assembled shear adhesive force setup. A correlation between groove size and apparent adhesive strength in the perpendicular loading direction was established based on the experimental results. Every 1% increase in the groove width ratio was associated with an 18.7 kPa increase in apparent adhesive strength. The increasing speed of the adhesion rapidly decayed as the groove depth increased. The increase in adhesion reached 99% of the maximum increase when the groove depth reached 0.8 times the width. The number of grooves had little effect on the adhesion when the total width of the grooves was kept constant. Stress distribution analysis was conducted using the finite element method, and the results were in accordance with the cracking phenomena in the experiments. The adhesive strength in the parallel loading direction was 30% lower than that in the perpendicular loading direction for all six chosen surfaces. This study is the first to propose a quantitative relationship between the surface textures of millimeter-sized grooves and ice adhesive strength. The loading orientation also had a substantial influence on adhesion. The results will serve as a valuable reference for future studies on ice adhesion on textured surfaces and for improving the performance of anti-icing/de-icing systems.

Experiments analysis of shear strength between granular ice and titanium alloy surface

Adhesive strength of ice on solid surfaces under dynamic heating condition

Numerical Study On The Adhesion Strength Between Ice And Aluminium Based On A Cohesive Zone Model

Freezing of Sessile Water Droplets on Titanium Alloy Surfaces with Various Roughness: an In-Situ Experimental Study

Experimental and theoretical study of the shear strength of ice-rock interface

Experimental Study on Adhesive Characteristics of Aircraft Dynamic Icing

Shear Adhesion of Ice on Large-Sized Grooved Aluminum Surfaces

Experimental Study on the Ice Freezing Adhesive Characteristics of Metal Surfaces

Adhesive Shear Strength of Ice from Nanostructured Graphite Surfaces by Molecular Dynamics Simulations

Molecular dynamics simulation and experimental study into effect of temperature on hardness of ice abrasives

Ice Adhesion Characterization Using Mode-I and Mode-II Fracture Configurations

Research on normal ice adhesion strength in icing wind tunnel

High-Speed Erosion Behavior of Hydrophobic Micro/Nanostructured Titanium Surfaces

Unraveling Ice-Solid Interface Rupture Dynamics: Insights from Molecular Dynamics Simulations

Experimental Investigation on Ice–Aluminum Interface Adhesion Strength under Heating Conditions

Experimental Study on Mixed-Mode (I–II) Fracture Toughness of Freshwater Ice

Effect of Shear Loading Conditions on the Measured Strength of Ice Adhesion to Superhydrophobic Surfaces

Experimental Study of Influence of Surface Roughness on Ice Adhesion

Experimental investigation on the temperature-dependent shear strength of frozen coarse-grained soil-rock interfaces by considering three-dimensional roughness

Study of Solidification and Microstructure Characteristics for Aircraft Icing

Numerical Simulation of Ice Shedding from Spinning Cone