Abstract:Ice adhesion is important when designing aircraft anti-icing/de-icing systems. Major and minor grooves are common in the skin of aircraft. However, the effects of millimeter-scale grooves on ice adhesive strength have not been given due attention. Specimens with varying depths, widths, and numbers of grooves were fabricated by machining to investigate the ice adhesive characteristics of large-sized grooved aluminum surfaces. After the ice cube was frozen on the surface using a silicon mold, the adhesive force was measured using a self-assembled shear adhesive force setup. A correlation between groove size and apparent adhesive strength in the perpendicular loading direction was established based on the experimental results. Every 1% increase in the groove width ratio was associated with an 18.7 kPa increase in apparent adhesive strength. The increasing speed of the adhesion rapidly decayed as the groove depth increased. The increase in adhesion reached 99% of the maximum increase when the groove depth reached 0.8 times the width. The number of grooves had little effect on the adhesion when the total width of the grooves was kept constant. Stress distribution analysis was conducted using the finite element method, and the results were in accordance with the cracking phenomena in the experiments. The adhesive strength in the parallel loading direction was 30% lower than that in the perpendicular loading direction for all six chosen surfaces. This study is the first to propose a quantitative relationship between the surface textures of millimeter-sized grooves and ice adhesive strength. The loading orientation also had a substantial influence on adhesion. The results will serve as a valuable reference for future studies on ice adhesion on textured surfaces and for improving the performance of anti-icing/de-icing systems.

Numerical Study On The Adhesion Strength Between Ice And Aluminium Based On A Cohesive Zone Model

Experimental Study on the Ice Freezing Adhesive Characteristics of Metal Surfaces

Experimental Investigation on Ice–Aluminum Interface Adhesion Strength under Heating Conditions

Experimental Study of Influence of Surface Roughness on Ice Adhesion

Shear Adhesion of Ice on Large-Sized Grooved Aluminum Surfaces

Numerical Simulation of Ice Shedding from Spinning Cone

Research on normal ice adhesion strength in icing wind tunnel

Ice Adhesion Characterization Using Mode-I and Mode-II Fracture Configurations

Experimental Study on Adhesive Characteristics of Aircraft Dynamic Icing

Adhesive strength of ice on solid surfaces under dynamic heating condition

Unraveling Ice-Solid Interface Rupture Dynamics: Insights from Molecular Dynamics Simulations

Experiments analysis of shear strength between granular ice and titanium alloy surface

Author Correction: Numerical Study of Ice Loads on Different Interfaces Based on Cohesive Element Formulation

Effect of the experimental parameters on the ice-asphalt adhesion strength and corresponding theoretical model based on the energy-balanced principle

Numerical Analysis of the Effect of Ice-Metal Interface Stress Singularity on Bonding Failure

Influence of substrate initial temperature on adhesion strength of ice on aluminum alloy

Freezing Adhesive Characteristics of Engineering Materials and Interface Damage Morphology Between Material and Ice

Numerical Modelling of Ice: Mechanical Behaviour of Ice under High Strain Rates

Numerical Simulation of Ice Accretion on Wings and Flow Field Analysis

Numerical Investigation of Airfoil Ice Accumulation: Ice Shape and Ice Crack Propagation

Interlaboratory Study of Ice Adhesion Using Different Techniques