Abstract:Explosives combustion is primarily classified into conductive and convective combustion. In situations where confinement is sufficiently strong, the instantaneous high pressure generated by convective combustion in cracks can cause rapid fragmentation of the explosive matrix, resulting in a significant increase in the combustion surface area and triggering a high-intensity reaction with potentially catastrophic consequences. Therefore, the study of convective combustion in cracks is crucial for ensuring the safety of weapons and explosives. Previous simulation studies have primarily used finite element analysis software, which has excellent performance in handling explosive detonation processes. However, its accuracy in describing gas behavior between explosives and constrained containers is limited. This study divides the combustion process of a pre-cracked explosive in a confined space into four stages based on reasonable assumptions and simplifications. We developed a simulation method that combines the Arrhenius formula with the MWSD model to model the combustion rate of the explosive. By introducing a correction coefficient, Con, to the Arrhenius formula, the formula and MWSD model control the first and third stages of explosive combustion, respectively, while smoothly transitioning during the second stage. We used this method to numerically simulate the experimental results of Shang Hailin et al. on a crack width of 50 μm. The simulation results include the temperature field and pressure field of the first three stages of explosive combustion and the pressure rise curve of the pressure measurement point at the same location, as in the experiment. The simulation results are consistent with the experimental results.

Study on the Explosion Characteristics of Single Igniting Solid Sensitized Fuel Air Explosive

Experimental Study on Unconfined Volume Explosion Effects of Low-mass New Fuel Air Explosives

Experimental Study on Single Ignition of Multi-Component Fuel Mixture

Experimental Study on Single Ignition Characteristics of Mixed Solid and Liquid Fuel

Experimental study on explosion effect during single ignition of fuel air explosive

Experimental Study on Single Ignition of Mixed Ternary Fuel

EXPERIMENTAL STUDY ON EXPLOSION PRESSURES OF UNRESTRICTED GAS CLOUD EXPLOSIONS

Ignition Characteristic Study on Some Combustibles under Various Atmosphere and Sample Size Conditions

Over-pressure and TNT Equivalence of Thermobaric Explosives

Experimental Study of the Effect of Nitrogen Addition on Gas Explosion

Pressure Field Analysis of Dust Explosion in Free Air

On the explosion characteristics for central and end-wall ignition in hydrogen-air mixtures: A comparative study

Experimental Study on Single Ignition of Solid and Liquid FAE

AN EXPERIMENTAL STUDY ON HEAT PROCESSES PROPERTES OF LIQUID PROPELLANT ROCKET EXPLOSION

TNT equivalency method in confined space based on steel plate deformation

Study On Detonation Sensitivity Of Low Energy Detonating Fuses

Evaluation on thermal damage effects of single event solid fuel air explosive

Study on the effect of ignition mode on overpressure of underexpanded hydrogen jet explosion

Establishment and analysis of damage calculation model under fuel air explosion effect

Numerical Study of PBX 9501 Explosive Combustion Process in Confined Space

Numerical Study of Underwater Explosion Bubble Pulse