Abstract:In gas transmission, the regulator needs to adjust the gas pressure from high to low. The pressure energy can be then recovered by an expander, and the expander can drive a generator to produce electricity. However, the gas pressure regulator system and generator torque process often present difficult adjustment of PI parameters, and strong non-linearity of the hysteresis comparator and switching table in the traditional direct torque control (DTC) cause difficulties in the controller design and lead to large fluctuations of the generator torque. This paper designs a model predictive controller (MPC) for the gas pressure regulator process to reduce generator torque fluctuations. Simultaneously, a fuzzy PI controller is designed for the generator rotational speed process, and an MPC controller is exploited for the torque process; they operate in a cascaded manner. The fuzzy PI controller is used to calculate the torque set point. And the MPC controller is designed to obtain the optimal voltage vector of the generator for improving control performance through time delay compensation. The simulation experimental results highlight that the fluctuation of the regulator outlet gas pressure is reduced by 7.9% and 8.1%, and the output torque range is reduced by 3.4% and 2.1% compared with the traditional PI control and fuzzy PI control, respectively. The generator torque fluctuation range is reduced by 82.3%, the rotational speed fluctuation range is reduced by 76.9%, and the three-phase current fluctuation range is reduced by 76.6% compared with the traditional DTC.

Simulation on Pressure Control of Adjustable-flow Gas Generator

Control Strategies for Gas Pressure Energy Recovery Systems

Predictive PID Control of the Pressure Reduction by Expander in High-pressure Pneumatic System

Neuro-Internal Model Based Optimal Control for Gasoline Blending Processes

An Equivalent Model of Gas Networks for Dynamic Analysis of Gas-Electricity Systems

Design and Simulation of Pneumatic Proportional Extra-High Pressure Valve

Simulation of Precision Flow Control System Based on MATLAB/Simulink

An Intelligent Adaptive Robust Controller Based on Neural Network for a Pneumatic System

Simulation Of Controllable Pressure-Clearance Characteristic Of A High Pressure Pneumatic Chamber

Rail pressure controller design of GDI basing on predictive functional control

Modelling And High-Precision Constant Pressure Control Of The Pneumatic Suspension System

Design and Characteristics Analysis of a High Precision Pneumatic Proportional Pressure Valve

Simulation and Experimental Investigation on Pressure Dynamics of Pneumatic High-Speed On/off Valves

Dynamic Modeling and Simulation of Unit's Steam Pressure Based on On-line Data and Neural Network

Pressure Control Characteristics Simulation Research of Electro-Hydraulic Proportional Variable Pump

A machine learning-based surrogate model for the rapid control of piping flow: Application to a natural gas flowmeter calibration system

Multi-variable PID Neural Network Decoupling Algorithm in Scrap Copper Smelting Process Control

Design and Simulation of a High Pressure Proportional Pneumatic Pressure Reducing Valve

Artificial-neural-network-based Fast Valving Control in a Power-Generation System

Artificial Neural Networks Controlled Fast Valving in a Power Generation Plant

Optimization of multivariable PI controllers for ALSTOM gasifier benchmark problem