Abstract:By focusing on a typical emitting wavelength of 1120 nm as an example, we present the first, to the best of our knowledge, demonstration of a high-efficiency, narrow-linewidth kilowatt-level all-fiber amplifier based on hybrid ytterbium-Raman (Yb-Raman) gains. Notably, two temporally stable, phase-modulated single-frequency lasers operating at 1064 nm and 1120 nm, respectively, were applied in the fiber amplifier, to simultaneously alleviate the spectral broadening of the 1120 nm signal laser and suppress the stimulated Brillouin scattering effect. An over 1 kW narrow-linewidth 1120 nm signal laser was obtained with slope efficiency of ${\sim}{77}\% $∼77% and beam quality of ${\rm M}_x^2\sim {1.25}$Mx2∼1.25, ${\rm M}_y^2 \sim {1.17}$My2∼1.17. The amplified spontaneous emission (ASE) noise in the fiber amplifier was effectively suppressed by incorporating an ASE-filtering system between the seed laser and the main amplifier. Furthermore, the experimental results demonstrate that the spectral linewidth broadening effect is tightly related to the injected power ratios between the two seed lasers. Overall, this setup could provide a reference on obtaining and optimizing high-power narrow-linewidth fiber lasers operating in the long wavelength extreme of the Yb gain spectrum.

1030 nm Kilowatt-Level Ytterbium-Doped Narrow Linewidth Fiber Amplifier

Fiber-solid, Hybrid, Single-Frequency Laser (100 W) with a 100 MHz Repetition Rate and 1 Ns Pulse Width from a Spherical Aberration Compensated Four-Stage Nd:YVO4 Amplifier

Kilowatt-level Yb-Raman fiber amplifier with narrow-linewidth and near-diffraction-limited beam quality

Kilowatt-level ytterbium-Raman fiber amplifier with a narrow-linewidth and near-diffraction-limited beam quality

3 Kw Narrow-Linewidth All-Fiber Amplifier with Near Diffraction Limited Beam Quality

Kw-Level 1030 Nm Polarization-Maintained Fiber Laser with Narrow Linewidth and Near-Diffraction-limited Beam Quality.

301 W Narrow-Linewidth In-Band Pumped Er:Yb Co-Doped Fiber Amplifier at 1585 Nm and Related Modeling for Dynamics Study and Optimization

Narrow Line-Width Ytterbium-Doped Fiber Ring Laser Based on Saturated Absorber

All-fiberized and narrow-linewidth 5 kW power-level fiber amplifier based on a bidirectional pumping configuration

All-fiber single frequency pulsed amplifier with 412 W peak power output operating at 1030 nm

933 W Yb-doped Fiber ASE Amplifier with 504 Nm Bandwidth

1010 nm Directly LD-Pumped 6kW Monolithic Fiber Laser Employing Long-Tapered Yb3+-Doped Fiber

13.9-Mj All Fiber Wide Band Ytterbium-Doped Fiber Amplifier

High-Efficiency Watt-Level 1014 Nm Single-Frequency Laser Based on Short Yb-Doped Phosphate Fiber Amplifiers

1030 nm high power polarization maintained fiber laser with narrow linewidth and near diffraction limited beam quality

A 4.8-kW high-efficiency 1050-nm monolithic fiber laser amplifier employing a pump-sharing structure

Research on ytterbium-doped photonic crystal fiber amplifier for the femtosecond fiber laser

High efficient 120W 1018nm single-frequency narrow linewidth amplification based on wide-tunable DBR fiber seed source

700 W single-frequency all-fiber amplifier at 1064 nm with kHz-level spectral linewidth

Kilowatt-Level High-Efficiency Narrow-Linewidth All-Fiber Tm3+-Doped Laser

Low-birefringence 120 W Yb Fiber Amplifier Producing Linearly Polarized Pulses with 69-Ghz Linewidth at 1083 Nm