Abstract:A meteorological moderate resolution sensor requires large field of view (FOV) and low distortion imaging. At present, a fixed-focus camera combined with a whiskbroom scanning mechanism or a fixed-focus multi-camera combined with pushbroom scanning mechanism is being used. Owing to the fixed focal length of the camera, a large FOV causes the difference of imaging distance and ground imaging angle between the nadir point and the edge of the FOV to be significantly large, resulting in a large difference in the resolution between the nadir point and the edge of the FOV. The study proposes to simultaneously adopt a distributed zoom concentric multiscale system to realize a large FOV, low distortion, and high quality imaging to coordinate with different compensation lenses to achieve a different FOV corresponding to different focal lengths, where the resolution drop between the nadir point and the edge of the FOV is reduced. To ensure the same illumination of the entire FOV, the entire system possesses the same F# with different FOVs exhibiting different entrance pupil diameters. The study analyzes the principle of aberration compensation of a concentric multiscale system when both the FOV and entrance pupil diameter are changed and completes three groups of optical design of different focal lengths with uniform F#. The results indicate that the system has advantages of low distortion and high imaging quality in the entire FOV. Moreover, the resolution drop in the entire FOV is reduced to approximately 50% of the traditional design scheme. To verify the implementability of the system, a set of prototype manufacturing and imaging experiments are conducted to prove that the system has satisfactory implementability, and the imaging quality is also satisfactory.

Design of fore continuous zoom optical system of AOTF spectral camera

An Optical Zoom System Based on Tunable Lens with Polymer Membrane and Multilayered Structure

Design and testing of optical inspection lens with large-field and high resolution

Zoom Optical System Using Tunable Polymer Lens

Design of a Compact Varifocal Panoramic System Based on the Mechanical Zoom Method.

Optimization of Longitudinal Alignment of an 4<i>f</i> System in a Compact Vectorial Optical-Field Generator Based on a High-Resolution Liquid Crystal Spatial Light Modulator

Design of a Refractive/Diffractive Hybrid Middle Infrared Continuous Zoom Optical System

Optical System Design of Continuous Zoom Objective Lens with Multi-Conjugate Distances

Design of High Ratio Middle Infrared Continuous Zoom Optical System

Continuous Zooming Optical Design with a High-Resolution and Large-Zoom Ratios Used for Precision Strike TV Camera

Design of VisSWIR continuous zoom optical system

A high-precision institutional design and mechanical performance analysis of the medium-wave infrared continuous zoom

Overall Design Technology of Hyperspectral Imaging System Based on AOTF

Design of Optical Imaging Lens for Intelligent Transportation Monitoring System

The design of wavefront coded imaging system

Optical Design of the Space Observation Camera with Long Focal Length and Wide Field of View

Construction Method Through Forward and Reverse Ray Tracing for A Design of Ultra-Wide Linear Field-Of-View Off-Axis Freeform Imaging Systems

Optical design of a distributed zoom concentric multiscale meteorological instrument

Design of a Continuous-Zoom 2D/3D Microscope with High Zoom Ratio and Full Field of View

Optical System Design for Zoom Lens Based on Delano Diagram

Design and theoretical analysis of the image-side telecentric zoom system using focus tunable lenses based on Gaussian brackets and lens modules