Abstract:Experiments and numerical simulations have been done to investigate the heat transfer, pressure loss and turbulent flow characteristics over the surfaces with arrays of shallow dimples of different dimple depths within channels. Three different dimple depth to diameter ratios of 0.067, 0.1 and 0.2 are investigated with the Reynolds number (Re) ranging from 10,000 to 60,000. Heat transfer measurements were done by using the transient liquid crystal thermography technique to obtain the local heat transfer enhancement characteristics. Additional steady-state experiments were also done to obtain the overall heat transfer enhancement and the pressure loss of the turbulent flow over the dimpled surfaces. The experimental results indicated that the dimple depth has appreciable effects on heat transfer enhancement and pressure loss. The Reynolds number also shows appreciable effects on the local heat transfer enhancement distribution on the surface with shallower dimples. The overall heat transfer enhancement of all the dimpled surfaces approximately keep constant with the Reynolds numbers. The experiments still indicate that the shallow dimples with the depth to diameter ratio of 0.067 obtained almost constant overall heat transfer enhancement up to 1.4 with negligible pressure loss penalty, which indicates a high and constant Reynolds analogy factor of about 1.33 over the studied Reynolds number range. However, as the dimple depth ratio increases from 0.067 to 0.2, the pressure loss increases rapidly and surpasses the heat transfer enhancement, which leads to lower Reynolds analogy factor than 1.0. Furthermore, the numerical simulations show detailed turbulent flow characteristics over the dimpled surfaces. Different from the dimples with relatively deep depth ratios of 0.1 and 0.2, the shallower dimples with the depth ratio of 0.067 generate an obvious low-speed swirling horseshoe vortex zone near the upstream rim in the dimples at the relatively high Reynolds number of 50,500. The horseshoe vortex shed from spanwise edges of the shallow dimples produces lower but more uniform turbulent mixing intensity in the near-wall region, which is responsible for the higher thermal performance.

A Detached Eddy Simulation of Unsteady Flow and Heat Transfer Characteristics of Dimple Vortex Generators

Experimental Study on Forced Convection Hydraulic and Thermal Characteristics in a Dimpled Flat Duct

Experimental of turbulent flow heat transfer of dimple vortex generators with rounded edge

Experimental Study and Numerical Analysis of Heat Transfer Enhancement and Turbulent Flow over Shallowly Dimpled Channel Surfaces

Experimental and Numerical Study of Heat Transfer and Flow Friction in Channels with Dimples of Different Shapes

Simulation of Heat Transfer Enhancement by Longitudinal Vortex Generators in Dimple Heat Exchangers

Analysis on Heat Transfer and Pressure Drop of a Microchannel Heat Sink with Dimples and Vortex Generators

An Experimental Investigation on the Flow Characteristics Over Dimple Arrays Pertinent to Internal Cooling of Turbine Blades

Experimental Study of Turbulent Flow Heat Transfer and Pressure Loss over Surfaces with Dense Micro-Depth Dimples under Viscous Sublayer

Numerical Investigation of Flow and Heat Transfer in A Dimpled Channel among Transitional Reynolds Numbers

Turbulent Flow Structure and Heat Transfer Mechanisms over Surface Vortex Structures of Micro V-shaped Ribs and Dimples

Experiments and Stress-Blended Eddy Simulations of Turbulent Flow over Edge-Rounded Dimples

Heat Transfer of Turbulent Flow over Surfaces with Spherical Dimples and Teardrop Dimples

Numerical Investigation on Heat Transfer Performance and Flow Characteristics in a Rectangular Air Cooling Channel (AR = 2) with Ridged Dimples

A Numerical Investigation of Dimple Effects on Internal Heat Transfer Enhancement of A Double Wall Cooling Structure with Jet Impingement

Experimental and Numerical Investigation of Thermal Performance of Channels with Staggered Array-Based Dimples

Experimental and Numerical Study on an Enhanced Swirl Cooling with Convergent Tube Wall and Local Dimple Arrangements

The Structural Optimization of Dimple in Microchannel for Heat Transfer Enhancement

Heat Transfer Analysis on Dimple Geometries and Arrangements in Dimple Jacketed Heat Exchanger

A Numerical Study of the Flow and Heat Transfer in the Pin Fin-Dimple Channels with Various Dimple Depths

Impact of pulsating vortex dynamics on the thermal performance of a dimpled surface