Abstract:The large superconducting magnet are widely used and play an important role in nuclear fusion device, high-energy accelerator, space target infrared and other forefront fields. In this paper, we design several cryogenic centrifugal compressor stages for helium refrigerator with 3.3K-11K inlet temperature, used in exhausting the low-pressure and low-temperature saturated helium steam, further producing superfluid helium and cooling the large superconducting magnet. Due to the cryogenic compressor running environment and the internal structure, about 30W heat leakage from impeller hubs and the end of shafts into the flow passages are unavoidable, and it is necessary to consider this heat leakage in the centrifugal compressor impeller design. Firstly, adding the heat leakage into thermodynamic process and centrifugal compressor effective formula, then adjusting the inlet and outlet design parameters according to the heat transfer rate and make the preliminarily designs of each stage of the compressor. Four different methods for varying p design condition parameters are compared by CFD simulation. The 3-D impellers are designed by the Streamline Curvature Method, and the vaneless diffusers and volutes are designed by the inlet and outlet section aerodynamic parameters. When the best design method is determined, the blade profiles are further adjusted in order to improve the stage performance. Finally, the characteristic curves under variable working conditions and the generalized stage performance curves of each stage are calculated. In this paper, we delve into a high efficiency centrifugal compressor stage design method with the consideration of heat transfer effect. In the next step, more running data will be obtained after the further experiments and the long-term operation.

Flow and Adiabatic Conceptual Design for Liquid Hydrogen Circulator

Segmented Design of Performance Enhancement for Large Plate Fin Heat Exchanger of Cryogenic Air Separation Unit

Hydrodynamic Study on the Riser of Chemical Looping Hydrogen Production System with Multiple Fluidized Bed Reactors

Numerical Study on the Process of Chemical Looping Hydrogen Production with Multiple Circulating Fluidized Bed Reactors

Suction and discharge flow controls of a co-rotating scroll hydrogen circulation pump

Design Of Cryogenic Centrifugal Compressor Stages With Heat Transfer Considerations

Design Of Cooling Water System (Cws) For Craft Lower Hybrid Current Driven (Lhcd) System

Design and Internal Flow Characteristic Investigation of High-Temperature H2/Steam-Mixed Working Fluid Turbine

Numerical simulation and design optimization of a circulating water channel on hydrodynamic flow performance

Design and Analysis of “Filling-Evacuating” High-Pressure Helium-Cooled Loop

Conceptual Design and Feasibility Test of Two-Phase Hydrogen Thermal Siphon System of CNS in CARR

Computational Analyses of Cavitating Flows in Cryogenic Liquid Hydrogen

Numerical Investigation Of A Cryogenic Liquid Turbine Performance And Flow Behavior

The Combination of Three-Dimension Inverse Design and Optimization Methods for Helium Circulator’s Impeller Optimization in HTR

Analysis and Optimal Design of Screen Channel Liquid Acquisition Device for Hydrogen

Optimization and Experiment of Supercritical Helium Flow in Cryopump

Efficient Cooling Strategies for Liquid Hydrogen Pipelines: A Comparative Analysis

Cavitation Suppression and Design Optimization in a Cryogenic Liquid Turbine Expander Based on Thermodynamic Cavitation and Entropy Production Analysis

Numerical Study on the Dynamic Process of Reciprocating Liquid Hydrogen Pumps for Hydrogen Refueling Stations

Performance Simulation on a New Type of Liquid Pump

Experimental Investigation of Two-Phase Countercurrent Flow Limit in Hydrogen Thermosiphon Loop of Cold Neutron Source