Abstract:A visual experimental system was built to explore the effect of low-pore-density copper metal foam (CMF) on the heat transfer during paraffin wax (PX) melting, and the effective thermal conductivities of composite phase change materials (PCMs) were obtained. A three-dimensional mathematical heat transfer model was established, the microstructure of the CMF was characterized using a high-definition camera, and a physical model of the CMF ball was determined. The melting heat transfer mechanism of the composite PCMs was investigated through the experimental and simulation results, including the temperature distribution, velocity vector, solid-liquid interface, volume fraction, heat transfer mechanism, and heat storage performance. The results show that as the CMF filling ratio increased from 0% to 2.13%, the temperature gradients of the composite PCMs were 86.1, 74.6, 29.2, and 12.6 K, indicating that the filling of CMF effectively alleviates the thermal stratification phenomenon during PX melting. Incorporation of the CMF increased the thermal conductivity of the composite PCMs, but suppressed their natural convection. When the CMF filling ratio was less than 1.28%, natural convection dominated the heat transfer type during PX melting; meanwhile, when the CMF filling ratio was greater than 1.28%, heat conduction was the major heat transfer mechanism. The composite PCMs exhibited great heat storage performance when the CMF filling ratio was 1.68%, and the heat storage rate was 13.25% higher than that of pure PX with the same heat storage capacity. In addition, a theoretical calculation model for predicting the heat transfer mechanism of the composite PCMs was established, and the results show that as the CMF filling ratio increased from 0.43% to 2.15%, the natural convection proportion of heat transfer performance decreased from 82.74% to 13.99% during the melting process.

Study on Heat Storage Performance Enhancement of Paraffin by Metallic Material

Numerical Study on Phase Change Heat Storage Enhancement of Paraffin Using Copper Foam

Preparation and Properties of Thermal Energy Storage and Temperature Regulation Microcapsulated Paraffin by P(MMA-co-AA)

Experimental and Numerical Study of Heat Transfer Characteristics of a Paraffin/Metal Foam Composite PCM

The Regulation Mechanism and Heat Transfer Enhancement of Composite Mixed Paraffin and Copper Foam Phase Change Materials

Experimental and simulation study on the heat transfer mechanism and heat storage performance of copper metal foam composite paraffin wax during melting process

Numerical studies on a fin-foam composite structure towards improving melting phase change

Effective Thermal Conductivity of Open-Cell Metal Foams Impregnated with Pure Paraffin for Latent Heat Storage

Investigation on the Melting Performance of a Phase Change Material Based on a Shell-and-Tube Thermal Energy Storage Unit with a Rectangular Fin Configuration

How can copper foam better promote the melting process of phase change materials

Comparative study on heat transfer enhancement of metal foam and fins in a shell-and-tube latent heat thermal energy storage unit

Experimental and numerical investigations of enhanced thermal energy storage performance for foam/paraffin composite under different heating conditions

Experimental Study on Melting and Solidification Cycle of a Hybrid Pin Fin/metal Foam Energy Storage Tank

Comparative analysis and research on heat transfer enhancement of fin tube-paraffin

Effect of enhancement in metal foam pore density on heat transfer of phase-change materials

Preparation and thermal characterization of paraffin/metal foam composite phase change material

Effect of Filling Height of Metal Foam on Improving Energy Storage for a Thermal Storage Tank

Form-stable and tough paraffin-Al2O3/high density polyethylene composites as environment-friendly thermal energy storage materials: preparation, characterization and analysis

Experimental visualization on thermal energy storage enhancement through metal foam filled annuli

Experimental study of heat transfer enhancement using metal foam partially filled with phase change material in a heat sink

Design and Evaluation of Metal Foam Horizontal Tube-and-shell Phase Change Accumulator: Optimal Position Distribution of Heating Tubes