Abstract:The gas-solid flow in a fluidized bed is modelled by a combined approach of discrete particle method and computational fluid dynamics (DPM-CFD), in which the motion of individual particles is obtained by solving Newton's second law of motion and gas flow by the Navier-Stokes equation based on the concept of local average. The coupling between DPM and CFD is achieved directly by applying the principle of Newton's third law of motion to the discrete particle and continuum gas which are modelled at different length and time scales. The equations of motion for a system of particles are solved by a collision dynamic model developed in this work which, in conjunction with the predictor-corrector method, allows stiff particles (K = 50,000 Nm(-1)) to be used with a reasonable computational time step (1.5 x 10(-5) s) while conserving the energy and momentum. The gas-phase equations are solved by the conventional SIMPLE method facilitated with the Crank-Nicolson scheme to give the second order accuracy in the time discretization.The proposed model shows its capacity of simulating the gas fluidization process realistically from a fixed to fully fluidized bed via an incipient fluidization stage. This is done by a series of numerical tests to reproduce the experimental procedures in determining the minimum fluidization velocity of 2400 particles (rho(p) = 2700 kg m(-3), D = 4 x 10(-3) m) in a pseudo-three-dimensional central jet fluidized bed of dimensions 0.9 x 0.15 x 0.004 m. The hysteretic feature of bed pressure drop vs superficial gas velocity curve is obtained for the first time realistically from first principles, with the predicted minimum fluidization velocity in good agreement with experiment. It is demonstrated that the proposed model is able to capture the gas-solid flow features in a fluidized bed from the largest length and time scales relevant to the processing equipment down to the smallest ones relevant to the individual particles. (C) 1997 Elsevier Science Ltd.

Solution of Population Balance Equation and Numerical Simulation of Fluidized Bed

Numerical simulation of pressure fluctuation in gas-solids agitated fluidized bed

Modeling Agglomeration Behavior in High Temperature Gas–Solid Fluidized Beds Via Monte Carlo Method

CFD Simulation of an Agitated Gas-Fluidized Bed: Effects of Particle–particle Restitution Coefficient on the Hydrodynamics

Experimental and numerical investigation of solid behavior in a gas–solid turbulent fluidized bed

Experimental and Numerical Study of Solids Concentration Distribution in Transition Section of Turbulent Fluidized Bed

CFD Simulation and Experiments of Dynamic Parameters in Gas–solid Fluidized Bed

Population Balance Equation of Cohesive Particle Flow in a Circulating Fluidized Bed

Particle-scale Simulation of Fluidized Bed with Immersed Tubes

The Numerical Method for Simulations Gas Solid Fluidization System

Soft-sphere simulation with unequal particle diameters in gas-solid fluidized beds

Evaluation of direct quadrature method of moment for the internally circulating fluidized bed simulation with ultrafine particles

Bubble Dynamics and Particle Orientation in a Binary Fluidized Bed Containing Spherocylinders and Spheres

A Euler-Euler Hydrodynamic Modelling and Simulation of Dense Particle Flow in a Small-Scale Fluidized Bed

Lagrangian-Eulerian Simulation of Slugging Fluidized Bed

Numerical Analysis of the Heterogeneous Gas–solid Flow in Fluidized Beds

Numerical Simulation of the Gas-Solid Flow in a Fluidized Bed by Combining Discrete Particle Method with Computational Fluid Dynamics

Investigation of mixing/segregation of mixture particles in gas-solid fluidized beds

Discrete Particle Simulation of Bubbling Behavior in a Gas-Solid Fluidized Bed

Numerical Simulation for Fluid Dynamics in a Gas-solid Fluidized Bed

Simulating the Flow Behavior of Bubbles and Particles in the Bubbling Fluidized Bed by the Method of Direct Simulation Monte Carlo and Large Eddy Simulation