Abstract:This study compares experimental observations on the two challenges of Ion Cyclotron Resonance Heating (ICRH), namely the coupling of waves to the plasma and the enhanced impurity sputtering in EAST and WEST medium size tokamaks. In WEST, Lower Hybrid (LH) power helps improving ICRH coupling. In both machines experiments reveal that fueling from the midplane not only helps to couple waves from nearby antennas like in other devices, but also has an impact on the scrape-off layer (SOL) density in regions that are not magnetically connected to the valves. Localized midplane nozzle valves allow similar (in WEST) or better (in EAST) coupling compared to poloidally distributed valves. Core density control requirements for long-pulse operation, in particular in L-mode regime, however limit the amount of gas that can be injected. During ICRH impurities can contaminate the plasma up to a level detrimental for the operation, e.g. up to 100% of ICRH power can be radiated on WEST in certain high power conditions. In WEST, tungsten (W) production measured by visible spectroscopy increases on all the observed objects during ICRH compared to a reference phase without ICRH. On some components (antenna side limiters, baffle, divertor) the rise is larger than with a similar LH power. The relative contribution of each object and physical process (RF-sheaths, fast ion ripple losses) to core contamination yet remains poorly known. Comparing antenna limiters with W-coating vs low-Z materials would help quantifying the role of these components. In EAST, the core W content, measured by EUV spectroscopy in presence of divertor sources only, is correlated with the total injected power, either from ICRH or LH. Since 2018 the LH guard limiter tiles were W-coated. Their contribution to the core W content appears more important than divertor sources when two-strap ICRH antennas magnetically connected to W components at the midplane is powered, compromising high performance operations.

Study of Liquid Impedance Matching for ICRF on the EAST Tokamak

Development of a real-time impedance matching system for ion cyclotron resonance heating in experimental advanced superconducting tokamak

Design and operations of a load-tolerant ICRH system in Experimental Advanced Superconducting Tokamak

Theoretical Study of the Impedance Matching of the Ferrite Tuner System for ICRF Heating

System identification for plasma shape control on EAST

ICRH Coupling Optimization and Impurity Behavior in EAST and WEST

New Capacitively Coupled Electrical Resistance Tomography (CCERT) System

Investigation of Developed Liquid Stub Tuner for the Antenna Impedance Matching for High-Power RF Plasma Experiments

EAST Ion Cyclotron Resonance Heating System for Long Pulse Operation

Numerical Impedance Matching via Extremum Seeking Control of Single-Frequency Capacitively Coupled Plasmas

RF Design and Tuning of a Deuteron RFQ for Detecting Impurity Deposition on a Tokamak

Characterization of SOL profiles and turbulence in ICRF-heated plasmas in EAST

Development of Impedance Sheath Boundary Condition in Stix Finite Element RF Code

The Matching Unit for the RF Ion Source at HUST

Design of an optimized load-resilient Conjugate T for the ICRH system in the LHD using a novel hybrid circuit/3DLHDAP code and experimental results

Detection of ion cyclotron emission by using an ion cyclotron range of frequency antennas-based diagnostic system in experimental advanced superconducting tokamak

Physical design and recent experimental results of the new ICRF antenna on EAST

Design and Platform Testing of the Compact Torus Central Fueling Device for the EAST Tokamak

Equilibrium reconstruction constrained by the consistency of current simulation on EAST

An Radio Frequency Impedance Matching Control Benchmark System for Advanced Control Strategies Evaluation

Radiofrequency sheath rectification on WEST: application of the sheath-equivalent dielectric layer technique in tokamak geometry