Abstract:In the design of high-speed low-power electrical generators for unmanned aircraft and spacecraft, maximization of specific output (power/weight) is of prime importance. Several magnetic circuit configurations (radial-field, axial-field, flux-squeezing, homopolar) have been proposed, and in this paper the relative merits of these configurations are subjected to a quantitative investigation over the speed range 10 000-100 000 rev/min and power range 250 W-10 kW. The advantages of incorporating new high energy-density magnetic materials are described. Part 1 deals with establishing an equivalent circuit for permanent-magnet generators. For each configuration the equivalent circuit parameters are related to the physical dimensions of the generator components and an optimization procedure produces a minimum volume design at discrete output powers and operating speeds. The technique is illustrated by a quantitative comparison of the specific outputs of conventional radial-field generators with samarium cobalt and alnico magnets. In Part II the specific outputs of conventional, flux-squeezing, and claw-rotor magnetic circuit configurations are compared. The flux-squeezing configuration is shown to produce the highest specifilc output for small sizes whereas the conventional configuration is best at large sizes. For all sizes the claw-rotor configuration is significantly inferior. In Part I1l the power densities available from axial-field and flux-switching magnetic circuit configurations are maximized, over the power range 0.25-10 kW and speed range 10 000-100 000 rpm, and compared to the results of Parts I & II. For the axial-field configuration the power density is always less than that of the conventional and flux-squeezing radial-field configurations.

Application and Technical Problems of Superconducting Magnet Technology in Aerospace Propulsion

Design and Analysis of Parallel Hybrid-Excited Superconducting Linear Motor for High-Speed Electromagnetic Suspension Maglev

APPLICATION AND DEVELOPMENT OF SUPERSONIC AIRFLOW ACCELERATION TECHNOLOGY BASED ON MAGNETOHYDRODYNAMICS

Development Of High Magnetic Field Superconducting Magnet Technology And Applications In China

Research progress and application of high-field superconducting magnets

Applied-Field Magnetoplasmadynamic Thrusters for Deep Space Exploration

Dynamic Simulation of A Superconducting Augmented Linear Propulsion System

Superconducting materials: Challenges and opportunities for large-scale applications

Applied Superconductivity and Electromagnetic Devices - Principles and Current Exploration Highlights

Integrated study on the comprehensive magnetic-field configuration performance in the 150 kW superconducting magnetoplasmadynamic thruster

Optimum Magnetic Circuit Configurations for Permanent Magnet Aerospace Generators

Superconducting Magnet Technology and Applications

Improvement of Magnetic and Cryogenic Energy Preservation Performances in a Feeding-Power-free Superconducting Magnet System for Maglevs

Experimental Study of a Solid-Nitrogen-Cooled HTS Magnet for Superconducting Linear Synchronous Motors

Design and Characteristic Analysis of an Axial Flux High-Temperature Superconducting Motor for Aircraft Propulsion

Progress of Ultra-High-field Superconducting Magnets in China

Drive Control Technology of Dual Three Phase Permanent Magnet Synchronous Motor for Electric Propulsion Aircraft

Research Status and Development of the Magnetic Field Design for Stationary Plasma Thruster

Novel Multiple Magnetic Source Axial Flux Modulation Machines for Aviation Propulsion Applications

On the Future Sustainable Ultra-High-speed Maglev: an Energy-Economical Superconducting Linear Thrusting System

Experimental investigation of the electromagnetic acceleration mechanisms in an Applied-field Magnetoplasmadynamic Thruster