Abstract:Phenol degradation was studied in a novel electrochemical system with TiO2/activated carbon fiber as anode and graphite as cathode. The removal of phenol was investigated in terms of various parameters namely: cathode and anode gap, pH, current density, initial phenol concentration and addition of Na2SO4. At the same time, percentages of phenol degradation and COD removal were observed at different electrodes. The results showed that, at the phenol concentration of 100 mg/L, cathode and anode gap of 2 cm, current density of 7.14 mA/cm(2), solution pH 6.20 and 0.0750 mol/L Na2SO4, degradation of 83.26% phenol and removal of 47.03% COD after 1 h electrolysis can be achieved with TiO2/ACF-graphite as anode, while 67.72% phenol and 35.78% COD achieved with ACF/graphite as anode. Under the same conditions mentioned above, no phenol can be detected in 105 min at the initial phenol concentration of 10 mg/L with TiO2/ACF-graphite as anode. The electrochemical oxidation reaction of phenol obeyed pseudo-first order kinetic. The mass adsorbed hydroxyl radicals were generated on the TiO2/ACF electrode due to its three-dimensional space, high oxygen evolution potential and the catalysis of TiO2. With the formation of hydroxyl radicals, the phenol was oxidized to produce hydroquinone, pyrocatechol and benzoquinone during electrochemical process. The concentrations of these three aromatic compounds achieve peak values after 3 h, 2 h and 1 h, respectively. Then, they gradually diminished and were degraded to form ring-opened products such as formic and maleic acids, which were oxidized to CO2 and H2O finally. (C) 2014 Published by Elsevier Ltd.

Research on the Activity of TiO2 -Ceo2 Catalysts for Wet Air Oxidation of Phenol

Preparation and Characterization of Tio2-Ceo2 Catalyst for Catalytic Wet Air Oxidation of Phenol

Catalytic wet air oxidation of phenol over CeO2-TiO2 catalyst in the batch reactor and the packed-bed reactor

Catalytic Wet Air Oxidation of Phenol with Ru/ZrO2-CeO2 Catalyst

Catalytic Wet Air Oxidation of Phenols over Porous Plate Cu-based Catalysts

Catalytic Wet Air Oxidation of Phenol with Pelletized Ruthenium Catalysts

Improved phenol degradation by catalytic wet air oxidation on the Co3O4 spinel catalysts supported on SBA-15 modified with TiO2

Promoted generation of singlet oxygen by oxygen vacancies-enriched Co3O4/g-C3N4 catalyst for efficient degradation of phenanthrene

Enhanced catalytic oxidation of diluted ethylene oxide on Pt/CeO<sub>2</sub> catalyst under low temperature

The Surface Properties and the Activities in Catalytic Wet Air Oxidation over CeO2–TiO2 Catalysts

Γ-Al2o3 Doped with Cerium to Enhance Electron Transfer in Catalytic Ozonation of Phenol

Mofs-derived CuCeOx Supported on H-zeolite Socony Mobile-5 for Catalytic Oxidation of 1,2-Dichlorobenzene

Phenol Degradation in an Electrochemical System with TiO2/activated Carbon Fiber As Electrode

Efficient activation of peroxymonosulfate by Co-doped mesoporous CeO2 nanorods as a heterogeneous catalyst for phenol oxidation

A H2O2 Oxidation Approach to Ti3C2/TiO2 for Efficient Photocatalytic Removal of Distinct Organic Pollutants in Water.

Catalytic ozonation of phenol in aqueous solution by Co3O4 nanoparticles

New Insight into the Design of Highly Dispersed Pt Supported CeO2-TiO2 Catalysts with Superior Activity for VOCs Low-Temperature Removal

Activity and Stability of Pelletized Ruthenium Catalysts in Wet Air Oxidation

Graphene oxide as an effective catalyst for wet air oxidation of phenol.

Catalytic Wet Air Oxidation of Phenol with Functionalized Carbon Materials As Catalysts: Reaction Mechanism and Pathway

Study on catalytic wet air oxidation of acetic acid by ZrxCe1-xO2 catalyst