Abstract:In this paper, Ce-modified Cu-based carbon materials (Cu-Ce/AC) were prepared by impregnation method using walnut shell as the carbon precursor, Cu-ammonia solution as Cu source and Ce as modifier. The catalytic wet air oxidation (CWAO) degradation of phenol wastewater was carried out in a self-assembled fixed-bed reactor. The stability of Cu-Ce/AC catalyst under different pH conditions was studied. This study combines XRD, BET, FT-IR, ICP-OES and XPS characterization techniques to study the main reasons for the deactivation of Cu-Ce/AC catalysts. The reaction mechanism of Cu-Ce/AC catalytic wet air oxidation degradation of phenol was clarified. The result indicates that although phenol was completely converted in the CWAO process, the acidic intermediate product produced were difficult to completely degraded. Therefore, the pH of the solution gradually decreased. In acidic environment, the interaction between active component Cu and carbon carrier is weak, resulting in a large amount of metal leaching into the solution. As a result, the COD conversion gradually decreases. The alkaline environment can effectively slow down the leaching of catalyst Cu while maintaining its high catalytic activity. In addition, the incompletely degraded intermediate products are easy to accumulate and deposit on the Cu-Ce/AC surface, block the micropores and cover the surface-active sites, which reduces the catalyst activity. The study also found that there is a redox cycle between Cu+, Cu2+ Ce3+ and Ce4+ during phenol degradation, which enables Cu and Ce to form a strong interaction. The redox cycle can also promote the formation of oxygen vacancy (h+), O2−·, and HO·, making the degradation of phenol more thorough. At the same time, the mutual conversion between metal lattice oxygen and surface chemisorbed oxygen can generate high concentration of oxygen defect sites, which can improve the oxygen storage capacity of Cu-Ce/AC. These oxygen vacancies also provide more reactive sites to further promote adsorption and catalytic oxidation degradation of phenol and intermediate products.

Preparation and Characterization of Tio2-Ceo2 Catalyst for Catalytic Wet Air Oxidation of Phenol

Research on the Activity of TiO2 -Ceo2 Catalysts for Wet Air Oxidation of Phenol

Catalytic wet air oxidation of phenol over CeO2-TiO2 catalyst in the batch reactor and the packed-bed reactor

Kinetics Study on Catalytic Wet Air Oxidation of Phenol by Several Metal Oxide Catalysts.

Γ-Al2o3 Doped with Cerium to Enhance Electron Transfer in Catalytic Ozonation of Phenol

Preparation of RuO2/γ-Al2O3 Catalysts and Study on Catalytic Wet Air Oxidation of Phenol

Phenol Degradation in an Electrochemical System with TiO2/activated Carbon Fiber As Electrode

Promoted generation of singlet oxygen by oxygen vacancies-enriched Co3O4/g-C3N4 catalyst for efficient degradation of phenanthrene

The Surface Properties and the Activities in Catalytic Wet Air Oxidation over CeO2–TiO2 Catalysts

Preparation of Nano-Tio2 Photocatalysts and Their Decomposition Activity in Phenol-Contaminated Water

Improved phenol degradation by catalytic wet air oxidation on the Co3O4 spinel catalysts supported on SBA-15 modified with TiO2

Deactivation characteristics of Ce-modified Cu-based carbon materials for catalytic wet air oxidation of phenol wastewater

Catalytic Wet Air Oxidation of Phenols over Porous Plate Cu-based Catalysts

Iron Oxide Coating Fenton-like Catalysts: Preparation and Degradation of Phenol

Catalytic Wet Air Oxidation of Phenol with Ru/ZrO2-CeO2 Catalyst

ACTIVITY AND STABILITY OF RuO2/γ-Al2O3 CATALYST IN WET AIR OXIDATION

Effect of Tio2 on the Property of Ruo2/Gamma-Al2o3 Catalyst

Effect of CeO addition on the structure and activity of RuO/γ-AlO catalyst

Effect of Ce 2 O 3 Phase Transition on the Catalytic Oxidation for Toluene over CeO 2 Catalysts

Preparation and Characterization of CuO/Ce0.5Ti0.5O2 and Its Catalytic Activity for NO+CO Reaction

Preparation of Nanocrystalline TiO2 Powders for Photocatalytic Oxidation of Phenol