Abstract:The C-band deflecting cavity designed last year is finished. In this paper, the RF measurement of the cavity is introduced. After tuning, it works well at 5.712GHz with a coupling factor degree around 1.05. And we measured the electromagnetic field with bead-pull method. The flatness of the magnetic field is around 0.9, which is not ideal but meet the requirements of the bunch length measurement. And we propose a method of tuning to make sure both frequency and field flatness. INTRODUCTION The C-band deflecting cavity designed last year for the measurement of ultra-short electron beams is finished. It’s a standing wave RF deflecting structure consisting of 3 cells. This cavity is designed to operate at a frequency of 5.712GHz. In the second section of the paper, the design of the deflector is briefly introduced. RF measurement results are shown in the third part. And a new tuning method is discussed in the fourth part. RF DEFLECTOR DESIGN In our case, we choose a 3-cell SW structure to meet the required transverse deflecting voltage Vdef=1MV. The working mode is TM110 mode and π-mode. The 3D-model draw by CST is shown in Figure 1. Figure 1: 3D-design of the deflector. The main part of the model is composed of several cylinders. The radii of the cells are determined by both the frequency and magnet field flatness. And the length of central cell is determined by the working mode while the length of the end cells is determined by the results of particle dynamics[1]. In order to make sure the polarization direction not changed while two cell coupled, two end cells are slotted on the edges which are perpendicular to the direction we put the coupler. According to the discussion above, the dimensions of the cavity are shown in figure 2 and table 2. Figure 2: 3D-design of the deflector. Table 1: Dimensions of the RF Cavity Dimensions Value(mm) rm 30.85 dm 21.49 re 30.61 de 10.93 t 4.76 rb 8 rslot (not shown in figure 2) 3.5 According to the dimensions, it’s easy to get the cavity parameters such as the transverse shunt impedance. And table 3 shows the main parameters of the RF cavity. With 1 MW input power, the deflecting voltage can be 1.19 MV. Table 3: Cavity Parameters Parameters Value Q0 9003 RT/Q(MΩ) 156 RT(MΩ) 1.42 P(MW) 1 Vdef(MV) 1.19 ___________________________________________ *Work supported by NSFC 11375098 and 11327902 #jxp14@mails.tsinghua.edu.cn MOPMR060 Proceedings of IPAC2016, Busan, Korea ISBN 978-3-95450-147-2 386 C op yr ig ht © 20 16 C C -B Y3. 0 an d by th e re sp ec tiv e au th or s 06 Beam Instrumentation, Controls, Feedback and Operational Aspects T03 Beam Diagnostics and Instrumentation In table 3, we are more concerned about RT/Q which has little change after machining. And we can evaluate the real deflecting voltage by measuring the quality factor Q0 by equation 1

Analysis and Calculation on Electron Bunch Length Measurement by Using CTR

A method of bunch by bunch measurement at nanoseconds interval by using cavity beam position monitors

Bunch Length Measurements Using Coherent Radiation

LOW Q CAVITY BPM STUDY FOR THE BEAM POSITION MEASUREMENT OF NANOSECOND SPACED ELECTRON BUNCHES *

Monitoring of Electron Bunch Length by Using Terahertz Coherent Transition Radiation

Absolute and non-invasive determination of the electron bunch length in a Free Electron Laser using a Bunch Compressor Monitor

Measurement of Pre-Bunched Beam's Longitudinal Form Factor Based on Radiation from a Tunable-Gap Undulator.

Multiple Parameter Characterizations for Electron Beam with Diffraction Radiation

Generation and Measurement of Velocity Bunched Ultrashort Bunch of Pc Charge

Bunch Length Measurement at Tsinghua Thomson Scattering X-ray Source

Experimental Characterization of Sub-picosecond Electron Bunch Length with Coherent Diffraction Radiation

Cavity-based bunch length measurement study for the Super Tau-Charm Facility transport line

Ultrashort Electron Bunch Length Measurement with Diffraction Radiation Deflector

Research of Kramers-Krnig Relationship for Reconstruction of Ultrashort Electron Longitudinal Bunch Profile by Means of Frequency Domain Measurements

C-Band Deflecting Cavity for Bunch Length Measurement of 2.5 MeV Electron Beam

Beam compression dynamics and associated measurement methods in the thz fel at caep

Ultrashort bunch train longitudinal diagnostics using RF deflecting structure

Status of non-destructive bunch length measurement based on coherent Cherenkov radiation

Pre-modulated electron bunch sequence

Simulations for measurements of longitudinal bunch profile using coherent smith-purcell radiation *