Abstract:Inductively Coupled Plasma Optical Emission Spectrometry (ICP-OES), Flame Atomic Absorption Spectrometry (FAAS) and Visible Spectrometry (VS) was applied for determination of Ag and Li in lithium-aluminium alloy standard sample and test sample, their respective advantages and disadvantages were compared, the excellent selectivity of ICP-OES was confirmed by analyses of certified standard sample. Three different sample digestion methods were compared and discussed in this study. It was found that the better accuracy would be obtained by digesting sample with chloroazotic acid while the content of Li was measured by FAAS, and it was better to digest sample with hydrochloric acid and hydrogen peroxide while determining Ag and Li by ICP-OES simultaneously and determining Ag by FAAS and VS. The interference of co-existing elements and elimination methods was detailedly discussed. Ammonium hydroxide was added to adjust the sample solution into alkalescent and Al, Ti, Zr was precipitated by forming hydroxide precipitation, Mg and Cu was formed complex precipitation with 8-hydroxyquinoline in this condition, then the interference from matrix element to determinate Ag by FAAS was eliminated. In addition, phosphate was used to precipitate Ti to eliminate its interference for determination of Li by FAAS. The same treatment of determination for Ag by FAAS was used to eliminate the interference of matrix element for determination of Ag by VS, the excess of nitrate was added into sample and heated to release Ag+ from silver chloride complex, and the color of 8-hydroxyquinoline was eliminated because of decomposed by heating. The accuracy of analysis result for standard sample was conspicuously improved which confirms the efficient of the method to eliminate interference in this study. The optimal digestion method and eliminate interference method was applied to lithium-aluminium alloy samples. The recovery of samples was from 100.39% to 103.01% by ICP-OES determination for Ag, and from 100.42% to 103.01% by ICP-OES determination for Li. The recovery ranged from 95.91% to 99.98% by FAAS determination for Ag, and ranged from 98.04% to 99.98% for FAAS determination of Li. The recovery was from 98.00% to 101.00 by VS determination for Ag, the analysis results all meet the analysis requirement.

A Study Of The Effect Of Aluminium On The Matrix Effects Of Rare Earth Elements In Inductively Coupled Plasma-Atomic Emission Spectrometry

Aluminium Fractionation Using Cation Exchange: Comparison Of Results Obtained After Fractionation In The Field And In The Laboratory

Study on the Effect and Mechanism of Impurity Aluminum on the Solvent Extraction of Rare Earth Elements (Nd, Pr, La) by P204-P350 in Chloride Solution

Effects of External Rare-Earth on Community and Diversity of Algae in Fresh Water

Electrodeposition of aluminum on rare earth alloy surface in room temperature molten salts

Leaching of rare earths and aluminum in weathered crust elution-deposited rare earth ore using magnesium sulfate: Effect of aluminum content in the leaching agent solution

Leaching Mechanism of Aluminum during Column Leaching of Ion-Adsorption Rare Earth Ore Using Magnesium Sulfate

Simultaneous determination of lead, nickel, tin and copper in aluminium-base alloys using slurry sampling by electrical discharge and multielement ETAAS

Comprehensive evaluation of matrix effect in the detection of Zn, Cd, Ni, Cu, Cr and Pb by solution cathode glow discharge optical emission spectrometry

Analytical Methodologies for Aluminium Speciation in Environmental and Biological Samples – a Review

Effect of Rare Earths on Hot Cracking Resistant Property of Mg-Al Alloys

Removal of Aluminum from Synthetic Rare Earth Leach Solution by Selective Complexation and Turbidity Point Extraction

Speciation Analysis of Aluminium(Iii) in Natural Waters and Biological Fluids by Complexing with Various Catechols Followed by Differential Pulse Voltammetry Detection

On-line Electrolytic Dissolution of Alloys and Multi-Element Determination by Inductively Coupled Plasma Atomic Emission Spectrometry

Advance in the Analytical Monitoring Techniques for Polynuclear Aluminum in Environmental Water Systems

EFFECTS OF RARE-EARTH SURFACE MODIFICATION OF THE Α-Al2o3 MICROPOWDER ON THE PROPERTIES OF ALUMINUM MATRIX COMPOSITES

THE INFLUENCE OF in 3+ ON THE NEGATIVE DIFFERENCE EFFECT OF ALUMINIUM

Elimination Of The Spectral Interference From Barium Polyatomic Ions On Rare Earth Elements In Inductively Coupled Plasma Mass Spectrometry By Ag50w-X8 Cation Exchange Chromatographic Separation

[Pretreatment of Aluminum-Lithium Alloy Sample and Determination of Argentum and Lithium by Spectral Analysis]

Leaching Behavior of Rare Earth Elements and Aluminum from Weathered Crust Elution-Deposited Rare Earth Ore with Ammonium Formate Inhibitor

A practical approach to non-spectral interferences elimination in inductively coupled plasma optical emission spectrometry