Abstract:CuO/TiO2 and CuO-ZrO2/TiO2 catalysts with different CuO loadings were prepared by the impregnation method using Cu(NO3)2 and Ce(NO3)3 aqueous solutions of desired concentrations. The catalytic activities in NO+CO reaction were investigated, and the structural and reductive properties of various CuO/TiO2 and CuO-ZrO2/TiO2 catalysts were characterized by means of BET, TPR, XRD and NO-TPD technology. It was found that after treatment in H2 at 500°C for 2h, the catalytic activities were improved dramatically compared with treatment in normal air at 500°C for 2h. The NO conversion temperature (T99%) was 325°C for 6% CuO/TiO2 and 300°C for 6% CuO-10% ZrO2/TiO2, and their activities increased with increase in ZrO2 loading. There were four TPR peaks in CuO/TiO2 and two TPR peaks in CuO-ZrO2/TiO2, indicating that addition of ZrO2 caused changes in CuO species on TiO2. The air-treated catalysts displayed CuO diffraction peaks, whereas the H2-treated catalysts displayed Cu metal diffraction peaks. Four desorption species (NO, N2O, N2 and O2) were detected during the thermal desorption of NO by CuO/TiO2 and CuO-ZrO2/TiO2 treated in both air and H2. There were two adsorption states of nitric oxide (NO) on the catalyst’s surface, i.e. desorption species at low temperature on the weak sites and at high temperature on the strong sites. Addition of ZrO2 onto CuO/TiO2 shifted the NO dissociation peaks towards low temperature, which means that the activity of NO decomposition was higher by CuO-ZrO2/TiO2 than by CuO/TiO2. The NO+CO reaction formed intermediary product N2O at low temperature but formed N2 at high temperature. In addition, the peak temperature of NO desorption corresponded with the catalyst’s activity under both air and H2, and the dissociation of NO on catalyst surface was a rate-determining step in NO+CO reaction.

Zrxtixal1-2xo2 Mixed Oxide: Preparation And Application In Three-Way Catalysts

Catalytic performance of MnO 2-CeO 2/Ti 0.25Zr 0.25Al 0.5O 1.75 monolith catalyst for low temperature selective catalytic reduction of NO with NH 3

A Facile Route for Spraying Preparation of Pt/TiO2 Monolithic Catalysts Toward VOCs Combustion

Studies on n-butane isomerization reaction on solid oxide super acid Pt-SO4 2- /ZrO2-Al2O3 catalysts

In-situ Formed Stable Pt Nanoclusters on Ceria-Zirconia Solid Solutions Induced by Hydrothermal Aging for Efficient Low-Temperature CO Oxidation

Effects of Zr Addition on the Performance of the Pd-Pt/Al 2 O 3 Catalyst for Lean-Burn Natural Gas Vehicle Exhaust Purification

Pt/MOx/SiO2, Pt/MOx/TiO2, and Pt/MOx/Al2O3 Catalysts for CO Oxidation

Simple Solid Mixed Pt/TiO2-ZrO2 Catalyst for CO Oxidation with Excellent Sulfur and Water Resistance at Relatively Low Temperature

Promoting effect of acid sites in hierarchical porous Pt/ZSM-5 catalysts for low-temperature removal of VOCs

Effects Of Zsm-5 And Sapo-11 On Activity Of Pt/Al2o3 Catalyst

Promotional effect of ZrO2 and WO3 on bimetallic Pt-Pd diesel oxidation catalyst

Studies of Ti0.5zr0.5o2 Supported Cuo Catalysts for No+Co Reaction

Comparative study of three-way catalytic performance over Pd/CeO2-ZrO2-Al2O3 and Pd/La-Al2O3 catalysts: New insights into microstructure and thermal stability

ZrO 2 -Supported Α-Mno 2 :Improving Low-Temperature Activity and Stability for Catalytic Oxidation of Methane

Studies of the activities of CuO/Ti0.5Zr0.50 2 catalysts for NO + CO reaction

Alloy strategy to synthesize Pt-early transition metal oxide interfacial catalysts

Catalytic Activities of CuO/TiO2 and CuO-ZrO2/TiO2 in NO + CO Reaction

Highly efficient Pt catalyst on newly designed CeO2-ZrO2-Al2O3 support for catalytic removal of pollutants from vehicle exhaust

Synthesis of high performance diesel oxidation catalyst using novel mesoporous AlLaZrTiOx mixed oxides by a modified sol-gel method

Pt@TiOx/TiO2 as a highly effective and stable recipe for C3H8 and C3H6 combustion

Catalytic Activities and Properties of Mesoporous Sulfated Al2O3–ZrO2