Abstract:To enhance the water flux of reverse osmosis membranes, thin film nanocomposite reverse osmosis membranes are prepared by incorporating functionalized multi-walled carbon nanotubes (MWNTs). The functionalized MWNTs are obtained by the treatment of pristine MWNTs with the mixed acid of H(2)SO(4) and HNO(3) (3: 1 v/v). The MWNTs are analyzed by Fourier transform infrared spectrometry (FTIR). The surface morphology and structure of membrane are characterized by scanning electronic microscopy (SEM), transmission electron microscopy (TEM) and contact angle measurement, respectively. Those results show that modified MWNTs yielded some hydrophilic groups, such as -COOH and -OH, which make acidified MWNTs disperse more evenly in the aqueous solution. The SEM and TEM results demonstrate that the functionalized MWNTs penetrated through the polyamide layer, and might play the role of water channel. Compared with the bare polyamide membrane, the MWNT-polyamide thin film nanocomposite membranes have more hydrophilic surface, and the water flux of MWNT-polyamide membranes improve dramatically. For 2000 ppm NaCl, the water permeability increases from 26 l/m(2)h without MWNTs to 71 l/m(2)h at the acidified MWNTs loading of 0.1% (w/v), while NaCl rejection of MWNT-polyamide membranes decreases obviously compared to bare polyamide membrane. However, for 200 ppm purified terephthalic acid (PTA) solution, the pure water flux increases from 19 l/m(2)h up to 49 l/m(2)h, while PTA rejection is all higher than 98%. The experimental results reveal that the modified MWNTs well dispersed in the polyamide thin film layer, and hence improve the water permeation.

Preparation and Characterization of PLA/MWNTs/HA Composite Membranes

Preparation and Characterization of Pvdf-Hfp Microporous Membrane by Template Method

Preparation and characterization of organic modified montmorillonite/polylactic acid nanocomposites

Preparation and Application of a New Type of Membrane Materials of Poly(Methyl Methacrylate-co-Acrylic Acid)/Montmorillonite

Preparation and Characterization of the MWNTs/PAA Composites

Fabrication and characterization of solution cast MWNTs/PEI nanocomposites

Preparation and Properties of Multi-Walled Carbon Nanotubes/Poly-L-Lactide Composite Ultrafine Fibers

Preparation and Rheological Characterization of Poly(methyl Methacrylate)/functionalized Multi-Walled Carbon Nanotubes Composites

Preparation and Characterization of Magnetic Multi-Walled Carbon Nanotubes–poly(l-Lactide) Composite

Preparation of high-flux thin film nanocomposite reverse osmosis membranes by incorporating functionalized multi-walled carbon nanotubes

The Preparation and Properties of PEN/MWNT Nanocomposites

Preparation and Characterization of PLA/MMT Nanocomposites with Microwave Irradiation

Optimization, characterization and nanofiltration properties test of MWNTs/polyester thin film nanocomposite membrane

Preparation and Properties of Nanocomposites Based on PLA,Graphite Nanosheets and MWCNTs

Morphology, Rheology and Crystallization Behavior of Polylactide Composites Prepared Through Addition of Five-Armed Star Polylactide Grafted Multiwalled Carbon Nanotubes

Preparation and Properties of the Polyimide/multi-Walled Carbon Nanotubes (mwnts) Nanocomposites

Fabrication and Characterization of PMMA/MWCNTs Composite Materials

Electrospun Aligned PLLA/PCL/functionalised Multiwalled Carbon Nanotube Composite Fibrous Membranes and Their Bio/mechanical Properties

Preparation and characterization of polyurethane/multiwalled carbon nanotube composites

The Fabrication of High Performance PVDF Hollow Fiber Ultrafiltration Membranes Modified by MWCNTs-OH

Poly(p-phenylene terephthalamide)/carbon nanotube composite membrane: Preparation via polyanion solution method and mechanical property enhancement