Abstract:Superhydrophobic surfaces are currently a subject of great interest and enthusiastic study because of their various important applications. In this paper, the relationships between contact angle, surface roughness and surface morphology were discussed to explore a simple procedure for preparing a superhydrophobic aqueous coating with tunable roughness surface. Transparent hydrophobic films with fluorine gradient distribution have been prepared from methacrylate copolymers modified with fluoroacrylate and siloxane (gamma-methaeryloxypropyltrilsopropoxysilane) in emulsion polymerization. The fluorine gradient distribution resulted from fluorine self-assembled was examined by Xray photoelectron spectroscopy analysis. The strawberry-like silica particles are obtained by utilizing the graft of different size silica particles modified with epoxy and amine functional groups, respectively. This makes the film form a composite interface with irregular binary structures and a hierarchical roughness to have high air-trapped ratio. The superhydrophobic surface was obtained by making use of silica particles to increase roughness and fluorocopolymer to provide low surface energy. By comparing the difference of water contact angles on the film surfaces between the admixture of fluoroemulsion with the sole diameter silica and that with composite silica particles, it was shown that the large roughness factor is not necessary while the high air-trapped ratio is indispensable. Although the composite silica particles play a vital role in governing the surface wettability, it is necessary to combine with a low surface energy to make a surface superhydrophobic. The composite surface turns from hydrophilic to superhydrophobic only when there is a proper cooperation with the fluorocopolymer having low surface energy, and the water contact angle will decrease when the mass ratio of emulsion to silica exceeds unity because of the filling of interspace on the film surface. The largest contact angle for water on the surface of hybrid film is about (174.2 +/- 2)degrees and the contact angle hysteresis is close to 0 degrees.

Gradient Distribution and Hydrophobicity of Fluorinated Emulsion Film Modified with Siloxane

Hydrophobicity of Polyacrylate Emulsion Film Enhanced by Introduction of Nano-SiO₂ and Fluorine

Synthesis and Characterization of Hybrid Fluoro‐emulsion Based on Silica/copolymer Composite Particles

Hydrophobicity of Polyacrylate Emulsion Film Enhanced by Introduction of Nano-SiO<sub>2</sub> and Fluorine

Hydrophobicity of Polyacrylate Emulsion Film Enhanced by Introduction of Nano-SiO2 and Fluorine

STUDIES ON GRADIENT DISTRIBUTION OF THE HYDROPHOBIC SEGMENT AND SURFACE MICROSTRUCTURE OF THE FLUORO-SILICON-CONTAINING METHACRYLATE SUPER HYDROPHOBIC COATINGS

Gradient Distribution of Fluorine on the Film Surface of the Organic–inorganic Hybrid Fluoropolymer

Synthesis and Characterization of Core-Shell Nano-Sio2/ Fluorinated Polyacrylate Emulsion

Preparation and Characterization of Copolymer Containing Fluorine-Silicon with Low Surface Energy

Preparation of Silane Modified Fluorinated Polyacrylate Emulsion and the Surface Properties of Its Fluorocarbon Coating

Influencing factors of emulsion polymerization of fluorine-modified silicon-acrylate and surface property of copolymer film

Surface topography and hydrophobicity of waterborne fluorinated acrylic/silica hybrid coatings

Preparation and Surface Properties of Core-Shell Polyacrylate Latex Containing Fluorine and Silicon in the Shell

Synthesis and Performances of Core-Shell Type Styrene-Acrylate Emulsion with Organic-Fluorine and Organic-Silicon

Properties of Styrene-Acrylate Emulsion Modified by Organosilicone-Organofluorine

Influence of film forming substrate on self-organized gradient structure of fluoroacrylate/polyurethane composite emulsion

The Study of the Acrylate Copolymer Emulsion Containing Fluorine

Surface Wettability of Fluorinated and Non-Fluorinated Polyacrylate Latex Blend Films

Surface Self-Segregation, Wettability, and Adsorption Behavior of Core-Shell and Pentablock Fluorosilicone Acrylate Copolymers

Influence of Fluorine-Containing Monomer Content on the Hydrophobic and Transparent Properties of Nanohybrid Silica Polyacrylate Coating Materials

Synthesis and Characterization of Fluorinated Acrylate Emulsion with Core-Shell Structure