Abstract:Summary The conventional experimental techniques used for performance evaluation of enhanced oil recovery (EOR) chemicals, such as polymers and surfactants, have been mostly limited to bulk viscosity, phase behavior/interfacial tension (IFT), and thermal stability measurements. Furthermore, fundamental studies exploring the different microscale interactions instigated by the EOR chemicals at the crude oil/water interface are scanty. The objective of this experimental study is to fill this existing knowledge gap and deliver an important understanding on underlying interfacial sciences and their potential implications for oil recovery in chemical EOR. Different microscale interactions of EOR chemicals, at crude oil/water interface, were studied by using a suite of experimental techniques, including an interfacial shear rheometer, Langmuir trough, and coalescence time measurement apparatus at both ambient (23°C) and elevated (70°C) temperatures. The reservoir crude oil and high-salinity injection water (57,000 ppm total dissolved solids) were used. Two chemicals, an amphoteric surfactant (at 1,000 ppm) and a sulfonated polyacrylamide polymer (at 500 and 700 ppm) were chosen because they are tolerant to high-salinity and high-temperature conditions. Interfacial viscous and elastic moduli (viscoelasticity), interface pressures, interface compression energies, and coalescence time between crude oil droplets are the major experimental data measured. Interfacial shear rheology results showed that surfactant favorably reduced the viscoelasticity of crude oil/water interface by decreasing the elastic and viscous modulus and increasing the phase angle to soften the interfacial film. Polymers in brine either alone or together with surfactant increased the viscous and elastic modulus and decreased the phase angle at the oil/water interface, thereby contributing to interfacial film rigidity. Interfacial pressures with polymers remained almost in the same order of magnitude as the high-salinity brine. In contrast, a significant reduction in interfacial pressures with surfactant was observed. The interface compression energies indicated the same trend and were reduced by approximately two orders of magnitude when surfactant was added to the brine. The surfactant was also able to retain similar interface behavior under compression even in the presence of polymers. The coalescence times between crude oil droplets were increased by polymers, while they were substantially decreased by the surfactant. These consistent findings from different experimental techniques demonstrated the adverse interactions of polymers at the crude oil/water interface to result in more rigid films, while confirming the high efficiency of the surfactant to soften the interfacial film, promote the oil droplets coalescence, and mobilize substantial amounts of residual oil in chemical EOR. This experimental study, for the first time, characterized the microscale interactions of surfactant-polymer chemicals at the crude oil/water interface. The applicability of several interfacial experimental techniques has been demonstrated to successfully understand underlying interfacial sciences and oil mobilization mechanisms in chemical EOR. These techniques and methods can provide potential means to efficiently screen and optimize EOR chemical formulations for better oil recovery in both sandstone and carbonate reservoirs.

Polyesters-based Oil-CO<sub>2</sub> Amphiphiles: Design and Miscible Promoting Ability

Application and Mechanism of a Novel CO<sub>2</sub>-Oil Miscible Flooding Agent, CAA8-X

Use of Ph-Responsive Amphiphilic Systems As Displacement Fluids in Enhanced Oil Recovery

Next-Generation Displacement Fluids for Enhanced Oil Recovery

Effects of CO 2 -philic nonionic polyether surfactants on miscibility behaviors of CO 2 –hydrocarbon systems: Experimental and simulation approach

Study on Oil and Gas Amphiphilic Surfactants Promoting the Miscibility of CO2 and Crude Oil

Study on Oil and Gas Amphiphilic Surfactants Promoting the Miscibility of CO 2 and Crude Oil

Chemical strategies for enhancing CO 2 -Hydrocarbon miscibility

The influence and mechanism of alkyl block polyethers on the interfacial tension and minimum miscibility pressure of CO 2 and shale oil

Study on the Synergistic Effects between Petroleum Sulfonate and a Nonionic–Anionic Surfactant for Enhanced Oil Recovery

Anionic-Nonionic and Nonionic Mixed Surfactant Systems for Oil Displacement: Impact of Ethoxylate Chain Lengths on the Synergistic Effect

CO2-responsive surfactant for oil-in-water emulsification and demulsification from molecular perspectives

Simultaneous adjustment on the CO2/oil and CO2/water interface tensions using hydrophilic, lipophilic and CO2-philic surfactants during CO2 flooding to enhance shale oil recovery after hydraulic fracturing

IDENTIFICATION, DESIGN AND SYNTHESIS OF OXYGENATED HYDROCARBON-BASED CO2-SOLUBLE POLYMERS FOR CHEMICAL AND PETROLEUM ENGINEERING APPLICATIONS

CO 2 -induced viscoelastic fluids based on a C 22 -tailed tertiary amine under different pressure and temperature

Dilational Rheological Properties of Surfactants at the Crude Oil-Water Interface: The Effect of Branch-Preformed Particle Gels and Polymers.

Amphiphilic Poly(ether Sulfone) Membranes for Oil/water Separation: Effect of Sequence Structure of the Modifier

Chemical Interactions and Demulsifier Characteristics for Enhanced Oil Recovery Applications

Promoting dissolution behaviors of low-carbon alcohol polyoxyethylene polyoxypropylene ether in CO 2 by molecular structure optimization and adding cosolvent

Microscale Interactions of Surfactant and Polymer Chemicals at Crude Oil/Water Interface for Enhanced Oil Recovery

Zwitterionic-nonionic compound surfactant system with low chromatographic separation effect for enhanced oil recovery