Fang-Jian Zhao,Fu-Qing Yuan,Bin-Lin Pan,Zhi-Cheng Xu,Qing-Tao Gong,Lei Zhang,Jian Hou,Lu Zhang
Abstract:The interfacial properties of a heterogeneous composite flooding system containing a surfactant fatty alcohol polyoxyethylene carboxylate (CEOC), branched-preformed particle gel (B-PPG), and polymer partly hydrolyzed polyacrylamide (HPAM) at the crude oil-water interface were investigated by a dilational rheology method. The results demonstrated that the CEOC molecules can form an elastic interfacial film with certain strength at the crude oil-water interface. The addition of HPAM to the CEOC solution has a detrimental effect on the interfacial film formed by CEOC molecules, leading to a decrease in the dilational modulus and an increase in the phase angle. Moreover, the addition of B-PPG to the CEOC solution also disrupts the stability and strength of the interfacial film of CEOC. In particular, linear HPAM with a lower steric hindrance is more likely to insert into the interfacial film of CEOC; thus, HPAM possesses a stronger destruction ability for the interfacial film of CEOC than B-PPG. When HPAM is compounded with B-PPG, a superimposed effect exists to cause more severe disruption for the interfacial film. The heterogeneous composite flooding system not only enhances oil recovery by increasing the viscosity of the bulk phase but also weakens the interfacial film to facilitate the post-treatment of the recovered crude oil. Thus, the heterogeneous composite flooding system exhibits promising prospects in practical application.
What problem does this paper attempt to address?
This paper aims to study the swelling rheological properties at the crude oil - water interface of a heterogeneous composite flooding system containing surfactant (C12EO3C), branched pre - formed particle gel (B - PPG) and partially hydrolyzed polyacrylamide (HPAM). Specifically, through the swelling rheology method, the researchers explored the influence of these components on the strength and stability of the interface film, and how their interactions affect the interface properties.
### Research Background
With the increase in oil demand, enhancing oilfield recovery (EOR) has become an urgent task in the petroleum industry. For this reason, a variety of enhanced oil recovery technologies have been developed, such as chemical flooding, thermal flooding, gas flooding and microbial flooding. Among them, chemical flooding is considered an economical and effective means. By injecting specific chemicals into the reservoir, pore pressure can be increased, interfacial tension (IFT) can be reduced, and the mobility of crude oil can be improved, so that the residual oil stored in rock pores or blind areas can be more easily extracted.
### Research Objectives
This paper mainly studies the following points:
1. **Surfactant C12EO3C**: Explore its ability to form an elastic interface film at the crude oil - water interface and its strength.
2. **Polymer HPAM**: Analyze its destructive effect on the interface film formed by C12EO3C, resulting in a significant decrease in the interface modulus and an increase in the phase angle.
3. **Branched pre - formed particle gel B - PPG**: Study its negative impact on the interface film formed by C12EO3C, reducing the strength of the interface film.
4. **Composite system**: Explore the superposition effect when HPAM and B - PPG are used in combination, further destroying the interface film, which is beneficial to the post - treatment of the produced crude oil.
### Main Findings
- **Surfactant C12EO3C**: It can form an elastic interface film with a certain strength at the crude oil - water interface.
- **Polymer HPAM**: Linear HPAM can easily insert into the interface film, resulting in a significant decrease in the interface modulus and an increase in the phase angle.
- **Branched pre - formed particle gel B - PPG**: Although it also has a negative impact on the interface film, its destructive ability is weak due to the steric hindrance effect.
- **Composite system**: When HPAM and B - PPG are used in combination, a superposition effect will occur, resulting in more severe interface film destruction, which is beneficial to the post - treatment of the produced crude oil.
### Conclusions
This study reveals the interaction mechanism of surfactants, branched pre - formed particle gels and polymers at the crude oil - water interface, providing a theoretical basis for enhancing oil recovery. At the same time, this heterogeneous composite flooding system not only improves the recovery efficiency by increasing the fluid viscosity, but also simplifies the post - treatment process of the produced crude oil by destroying the interface film, and has broad application prospects.