Abstract:Triethylammine (Et3N), Morpholine, tetraethylammonium hydroxide (TEAOH), TEAOH-Et3N dual template and TEAOH-Morpholine dual template can all be used to synthesize pure SAPO-34 molecular sieve. The SAPO-34 molecular sieve samples are synthesized with the five kinds of templates mentioned above and characterized with XRD, SEM, FTIR, NMR and TGA techniques, etc. And the samples are also evaluated by methanol-to-olefins (MTO) reaction. The SAPO-34 sample synthesized with single Et3N has the defects in the crystal lattice which could be proved by the undistinguished low peaks at 2theta value 26degrees, 31degrees and the lower characteristic peaks in the XRD pattern. These defects can be effectively improved by using the dual template TEAOH-Et3N system as is shown by the two more distinct double peaks at 2theta value 26degrees, 31degrees and the higher characteristic peaks. The relative crystallinity of sample synthesized with the dual template TEAOH-Morpholine (Et3N) is between the sample with single TEAOH and that with single Morpholine (Et3N). This phenomenon shows an interesting "additional effect". Different templates could synthesize SAPO-34 molecular sieves with different crystal sizes. TEAOH is favourable to produce the small crystal SAPO-34, while Morpholine would synthesize big crystals and Et3N forms the crystals whose size is between TEAOH one and Morpholine one. The crystal size can be adjusted by the dual template method effectively. The SAPO-34 molecular sieve samples with the use of TEAOH have far smaller crystal sizes than the samples with single Morpholine or Et3N no matter TEAOH is the sole template or a composite template. Framework vibrancy modes of SAPO-34 molecular sieve samples synthesized from different templates are similar, while their interaction modes between templates molecules and framework are different. TEAOH is more effective in the formation of SAPO-34 structure, and it is more favourable to enter the pore system of SAPO-34 and easier to react with the negative charge of the structure of SAPO-34 to form the protonated molecules which are thermally decomposed at a higher temperature. The amount of Morpholine and Et3N is more than that of TEAOH in the initial gel, so the main role of Morpholine or Et3N is filling the cavity of SAPO-34. The SAPO-34 synthesized from different templates has the same thermal stability as their structures all thermally collapse at ca. 1155degreesC. The SAPO-34 molecular sieve synthesized with the dual template system has higher (C-2(=) + C-3(=)) selectivity in MTO reaction than the sample with single Morpholine or single Et3N, while it is still lower than the TEAOH sample. This phenomenon also shows a kind of the additional effect.

Characterization and Thermal Decomposition Modes of SAPO-34 Molecular Sieves Synthesized with Different Templates

Study on Synthesis of Sapo-34 Molecular Sieve Using Composite Template Teaoh-Morpholine Ii. Surface Acidity and Catalytic Performance of Sapo-34 Molecular Sieve

Synthesis of SAPO-34 Molecular Sieves and Their Catalytic Performances in Methanol-to-Olefins Reaction

Synthesis of SAPO-34 Molecular Sieve by Liquid-Phase Crystallization

Crystallization Process of Sapo-34 Molecular Sieve Using Hydrogen Fluoride and Triethylamine As Composite Template

Synthesis of Sapo-34 Molecular Sieve Using Hydrogen Fluoride and Triethylamine As Composite Template

Synthesis Optimization of SAPO-34 in the Presence of Mixed Template for MTO Process

Effect of silica/alumina ratio and structure-directing agent on the physical and chemical properties of SAPO-34

Effect of different TEAOH/DEA combinations on SAPO-34’s synthesis and catalytic performance

Synthesis, characterization and catalytic performance of SAPO-34 molecular sieves for methanol-to-olefin (MTO) reaction

Synthesis of Nano-sheet SAPO-34 Zeolites Via Aminothermal Method and Its Methanol to Olefins (MTO) Performance

Phase-transformation synthesis of SAPO-34 and a novel SAPO molecular sieve with RHO framework type from a SAPO-5 precursor

The Synthesis of SAPO-34 with Mixed Template and Its Catalytic Performance for Methanol to Olefins Reaction

Changing Template/Al2O3 Ratio in Reaction Gel—An Effective Way to Regulate Nature of Intermediate Phases and Properties of SAPO-11 Molecular Sieves during Crystallization

Effect of kaolin calcined temperature on the preparation and crystallization mechanism of SAPO-34 molecular sieve for methanol-to-olefins performance

Synthesis of SAPO-34 with the Presence of Additives and Their Catalytic Performance in the Transformation of Chloromethane to Olefins

Synthesis of SAPO-44 molecular sieve and its catalytic performance in methanol-to-olefins reaction

Synthesis of SAPO-34 nanocrystallites by epoxy-functional organosilane with improved MTO catalytic performance

Synthesis and Crystallization Mechanism for SAPO‐34 Zeolite Derived from Magadiite

In-Situ Synthesis of Sapo-34 Molecular Sieves on Monolithic Cordierite Substrates

Catalytic and deactivated behavior of SAPO-34/ZSM-5 composite molecular sieve synthesized by in-situ two-step method