Abstract:Triethylammine (Et3N), Morpholine, tetraethylammonium hydroxide (TEAOH), TEAOH-Et3N dual template and TEAOH-Morpholine dual template can all be used to synthesize pure SAPO-34 molecular sieve. The SAPO-34 molecular sieve samples are synthesized with the five kinds of templates mentioned above and characterized with XRD, SEM, FTIR, NMR and TGA techniques, etc. And the samples are also evaluated by methanol-to-olefins (MTO) reaction. The SAPO-34 sample synthesized with single Et3N has the defects in the crystal lattice which could be proved by the undistinguished low peaks at 2theta value 26degrees, 31degrees and the lower characteristic peaks in the XRD pattern. These defects can be effectively improved by using the dual template TEAOH-Et3N system as is shown by the two more distinct double peaks at 2theta value 26degrees, 31degrees and the higher characteristic peaks. The relative crystallinity of sample synthesized with the dual template TEAOH-Morpholine (Et3N) is between the sample with single TEAOH and that with single Morpholine (Et3N). This phenomenon shows an interesting "additional effect". Different templates could synthesize SAPO-34 molecular sieves with different crystal sizes. TEAOH is favourable to produce the small crystal SAPO-34, while Morpholine would synthesize big crystals and Et3N forms the crystals whose size is between TEAOH one and Morpholine one. The crystal size can be adjusted by the dual template method effectively. The SAPO-34 molecular sieve samples with the use of TEAOH have far smaller crystal sizes than the samples with single Morpholine or Et3N no matter TEAOH is the sole template or a composite template. Framework vibrancy modes of SAPO-34 molecular sieve samples synthesized from different templates are similar, while their interaction modes between templates molecules and framework are different. TEAOH is more effective in the formation of SAPO-34 structure, and it is more favourable to enter the pore system of SAPO-34 and easier to react with the negative charge of the structure of SAPO-34 to form the protonated molecules which are thermally decomposed at a higher temperature. The amount of Morpholine and Et3N is more than that of TEAOH in the initial gel, so the main role of Morpholine or Et3N is filling the cavity of SAPO-34. The SAPO-34 synthesized from different templates has the same thermal stability as their structures all thermally collapse at ca. 1155degreesC. The SAPO-34 molecular sieve synthesized with the dual template system has higher (C-2(=) + C-3(=)) selectivity in MTO reaction than the sample with single Morpholine or single Et3N, while it is still lower than the TEAOH sample. This phenomenon also shows a kind of the additional effect.

Phase-transformation synthesis of SAPO-34 and a novel SAPO molecular sieve with RHO framework type from a SAPO-5 precursor

Synthesis and Crystallization Mechanism for SAPO‐34 Zeolite Derived from Magadiite

Characterization and Thermal Decomposition Modes of SAPO-34 Molecular Sieves Synthesized with Different Templates

Crystallization Process of Sapo-34 Molecular Sieve Using Hydrogen Fluoride and Triethylamine As Composite Template

Crystallization and Si incorporation mechanisms of SAPO-34

Controlled synthesis of high performance SAPO-34 with sheet-like morphology and small particle size using concentrated gel system

Preparation of floral mesoporous SAPO-34 with the aid of fluoride ion

Enhancing Stability of SAPO-37 Molecular Sieve through Aluminum Phosphate Utilization: Synthesis, Stability Mechanism, and Catalytic Performance

A layered mesoporous SAPO-34 prepared by using as-synthesized SBA-15 as silica source

Synthesis of Sapo-34 Molecular Sieve Using Hydrogen Fluoride and Triethylamine As Composite Template

Synergic regulation of crystalline phase, composition and morphology of SAPO-34 via metal assistance and in situ etching strategy

Synthesis and Characterization of SAPO-56, a New member of silicoaluminophosphate

Synthesis of SAPO-34 nanocrystallites by epoxy-functional organosilane with improved MTO catalytic performance

Synthesis and Applications of SAPO‐34 Molecular Sieves

Controlled synthesis of hierarchically porous SAPO-34 zeolites with tailored crystal size and morphology

Synthesis of SAPO-34 Molecular Sieves and Their Catalytic Performances in Methanol-to-Olefins Reaction

Effect of silica/alumina ratio and structure-directing agent on the physical and chemical properties of SAPO-34

Affecting the Formation of the Micro‐structure and Meso/macro‐structure of SAPO‐34 Zeolite by Amphipathic Molecules

Unraveling the non-classic crystallization of SAPO-34 in a dry gel system towards controlling meso-structure with the assistance of growth inhibitor: Growth mechanism, hierarchical structure control and catalytic properties

Study on the crystallization mechanism of molecular sieve SAPO-34

Studies on synthesis and acidity of a single organic compund templated SAPO-11 molecular sieve