THERMO-EFFECT ON HIGH-SPEED LANDSLIDE

鲁晓兵,矫宾田,张金来,王淑云,崔鹏

DOI: https://doi.org/10.3321/j.issn:1000-6915.2005.03.011

2005-01-01

Abstract:The effects of the thermal and the pore pressure generated by high-speed landslide are discussed. First, the controlling equations that govern the thermo-pore-mechanical phenomenon in high-speed landslide are given. Second,the initiation conditions of slide-band(shear band) and the evolution of the band are discussed. At last,the generation and diffusion of the thermal and pore pressure which may cause the obvious decrease of friction coefficient in slide-band are analyzed by numerical simulation. The results show that the instabilization,which is the precursor of the forming of slide-band , initiates once the thermo-softening effect overcomes the strain-hardening effect. After instabilization the localized shear strain becomes severe. Generally,the bandwidth develops with time,which can cause severe changes of the strain and the strain ratio in the band. The drastic changes of strain and strain ratio can cause distinct increase of pore pressure and temperature in the band. The accelerated motion is caused by material strain softening,which further promotes the material strain-rate softening inside the shear band. Owing to the speed of initiating process,heat is trapped inside the shear band,which leads rapidly to the increase of pore pressure,total loss of strength,and uninhibited sliding motion on a small-friction or frictionless base.