Abstract:Steam injection process is usually the primary extraction method for heavy oil reservoirs. But, in recent decades, with the steam injection operation continues, most of the steamed heavy oil reservoirs have achieved a depleted status (residual oil zone). Meanwhile, for most post steamed heavy oil reservoirs, the average formation temperature can reach above 150℃. It indicates that they can be considered as a potential artificial geothermal energy source. In this work, those post steamed heavy oil reservoirs are proposed as a source of artificial geothermal energy, and the extraction potential is evaluated. A heavy oil reservoir simulation model is firstly constructed based on a geological model which involves a five-spot well pattern of steam flooding operation in Shengli oilfield, Sinopec. This model can be used to represent a depleted status of a steamed heavy oil reservoir. Subsequently, based on this five-spot well pattern of steam flooding, a geothermal heat extraction model is developed. In order to accurately evaluate the extraction potential of this artificial geothermal energy, the wellbore heat loss is also considered by using a discretized wellbore model. Thus, two different extraction methods of water injection and CO2 injection are simulated. Then, based on the simulation model, the factors that control the heat extraction rate in high temperature depleted heavy oil reservoirs are also discussed. Results show that a post steamed heavy oil reservoir can be a potential source of geothermal energy. By using the existing steam flooding well pattern, the initial investment is reduced, thus, a high-efficient development can be achieved. From the simulation results, it is found that the method of geothermal energy extraction in high temperature depleted heavy oil reservoir (165 ℃, 2 MPa) using CO2 can achieve a high-speed geothermal energy extraction process in the early stage (<1.5 years). In comparison, a method of water injection process performs better within a longer time period (>1.5 years). Simultaneously, it is found that the bottom-hole pressure, heat extraction time and CO2 injection rate can have the biggest impact on the heat extraction rate. Because of the high temperature condition, the post steamed heavy oil reservoirs can have a huge potential of heat mining. The technology of geothermal energy extraction can further enhance their development value and prolong the working life.

A productivity prediction model for cyclic steam stimulation in consideration of non-Newtonian characteristics of heavy oil

Mathematical Modeling for the Production Performance of Cyclic Multi-Thermal Fluid Stimulation Process in Layered Heavy Oil Reservoirs

Non-Newtonian Flow Characteristics of Heavy Oil in the Bohai Bay Oilfield: Experimental and Simulation Studies

A Novel Prediction Model for Steam Temperature Field of Downhole Multi-Thermal Fluid Generator

A coupled model for predicting thermophysical properties of saturated steam in dual-tubing SAGD horizontal wells with toe-point injection technique

A semi-analytical model based on unsteady conductive heat transfer in steam-assisted gravity drainage (SAGD)

A Semi-Analytical Model for Production Prediction of Deep CBM Wells Considering Gas-Water Two-Phase Flow

Data-Driven Proxy Model for Forecasting of Cumulative Oil Production during the Steam-Assisted Gravity Drainage Process

A Fractional Step Method to Solve Productivity Model of Horizontal Wells Based on Heterogeneous Structure of Fracture Network

Steam Cavity Expansion Model for Steam Flooding in Deep Heavy Oil Reservoirs

Simulation of wellbore pipe flow in oil production engineering: Offshore concentric double-tube CO 2 -assisted superheated steam wellbore during SAGD process of heavy oil reservoirs

Theoretical Insight into the Effect of Steam Temperature on Heavy Oil/Steam Interface Behaviors Using Molecular Dynamics Simulation

Potential Evaluation on the Artificial Geothermal Energy of Post Steamed Heavy Oil Reservoirs

Productivity Prediction Model for Stimulated Reservoir Volume Fracturing in Tight Glutenite Reservoir Considering Fluid-Solid Coupling

Productivity Model for Multi-Fractured Horizontal Wells with Complex Fracture Networks in Shale Oil Reservoirs Considering Fluid Desorption and Two-Phase Behavior

Experimental and simulation studies on steam stimulation with multiple fluids for offshore heavy oil reservoirs

Coupled Wellbore/Near-Well Flow and Geomechanical Thermal Simulation of Cyclic Steam Stimulation with Different Geometric Fractures

A prediction method of oil recovery for hot water chemical flooding in heavy oil reservoirs: Semi-analytical stream tube model

Coupling Mechanism of Multiple-Thermal-Fluid Multi-Cycle Stimulation in Ultra-Heavy-Oil Reservoirs

Experimental and numerical investigation on extra-heavy oil recovery by steam injection using vertical injector -horizontal producer

Analytical modeling on the geo-stress and casing damage prevention with the thermo-hydro-mechanical (THM) coupling of multi-field physics