Abstract:Freezing and thawing alternation is one harsh weather condition for the concrete structures serving in seasonal frozen areas. As an emerging construction material, the frost-resistance of ultra-high performance concrete (UHPC) is highly necessary to be understood for propelling its practical application. In this study, the frost-resistance of UHPC was systematically evaluated based on the mechanical properties and the cracking behaviors. The fast freezing and thawing (FT) cycles were chosen as the experiment condition, along with the water-immersion condition for comparison. A combination of destructive mechanical and non-destructive resonance frequency test was used to characterize the behaviors. The results showed that, after undergoing 300 FT cycles, the tensile initial cracking strength, the tensile strength, the flexural strength, and the compressive strength exhibited a certain of degradations. The corresponding effects of the water-immersion action were more positive. The tensile strain capacity under the FT condition almost kept constant, whereas that under the water-immersion condition decreased. The two indices (including strain and strength) could reasonably reflect the magnitude of tensile strain. The digital image correlation (DIC) analysis unveiled that there may exist an additional plastic deformation in the tensile full-field deformation, apart from the elastic deformation and crack opening. Compared with the water-immersion action, the FT action resulted in a less zigzag cracking path, shorter cracking time, and larger crack opening under flexural loading. In addition, the variations of dynamic modulus of elasticity and re-hydration reaction degree under the FT condition were not coincident with those of mechanical properties. The findings could provide some valuable references for estimating the bearing capacity of the UHPC structures served in practical engineering.

Investigation on Degradation of Micromechanical Properties of Interfacial Transition Zone of Ultra-High Performance Concrete under Freeze-Thaw Cycles

Nanoindentation-based Micromechanical Characterisation of Ultra-High-performance Concrete Exposed to Freezing–thawing

Development of Internal Moisture Transfer and Cumulative Residual Strain in Concrete under Freeze-Thaw Cycles

Investigation of Microstructural Damage in Ultrahigh-Performance Concrete under Freezing-Thawing Action

Systematic studies on behaviors of ultra-high performance concrete subject to freezing and thawing cycles combining DIC technology

Experimental Investigation of the Deformational Behavior of the Interfacial Transition Zone (itz) in Concrete During Freezing and Thawing Cycles

On the Modeling of Tensile Behavior of Ultra-High Performance Fiber-Reinforced Concrete with Freezing-Thawing Actions

Stress Analysis for Concrete Materials under Multiple Freeze-Thaw Cycles

Durability of Ultra-High Performance Concrete in Tension under Cold Weather Conditions

Experimental Study on Mechanical Properties and Pore Structure Deterioration of Concrete under Freeze–Thaw Cycles

Microscopic Characterization of Concrete Durability Using Nano-Indentation Tests

Durability of micro-cracked UHPC subjected to coupled freeze-thaw and chloride salt attacks

Mesoscale Simulation of Fatigue Behavior of Concrete Materials Damaged by Freeze-Thaw Cycles

Experimental Examination of Electrical Characteristics for Portland Cement Mortar Frost Damage Evaluation

The Effects of Hybrid Steel/Basalt Fibers on the Durability of Concrete Pavement against Freeze-Thaw Cycles

Study on Freezing-Thawing damage mechanism and evolution model of concrete

Sustainable ultra-high performance concrete with incorporating mineral admixtures: Workability, mechanical property and durability under freeze-thaw cycles

Mechanics Behavior of Ultra High Toughness Cementitious Composites after Freezing and Thawing

High temperature and freeze-thaw study of strengthened concrete with ultra-high-performance concrete

Experimental study of the durability properties of ultra-high toughness cementitious composites under freezing and thawing cycles

Multi-scale Thermo-Poro-mechanical Simulation of the Frost Resistance of Low-Heat and Moderate-Heat Hydraulic Concrete Considering the Aging Microstructure