Abstract:Purpose The application of thermal barrier coatings (TBCs) allows aero-engine blades to operate at higher temperatures with higher efficiency. The preparation of the TBCs increases the surface roughness of the blade, which impacts the thermal cycle life and thermal insulation performance of the coating. To reduce the surface roughness of blades, particularly the blades with small size and complex curvature, this paper aims to propose a method for industrial robot polishing trajectory planning based on on-site measuring point cloud. Design/methodology/approach The authors propose an integrated robotic polishing trajectory planning method using point cloud processing technical. At first, the acquired point cloud is preprocessed, which includes filtering and plane segmentation algorithm, to extract the blade body point cloud. Then, the point cloud slicing algorithm and the intersection method are used to create a preliminary contact point set. Finally, the Douglas–Peucker algorithm and pose frame estimation are applied to extract the tool-tip positions and optimize the tool contact posture, respectively. The resultant trajectory is evaluated by simulation and experiment implementation. Findings The target points of trajectory are not evenly distributed on the blade surface but rather fluctuate with surface curvature. The simulated linear and orientation speeds of the robot end could be relatively steady over 98% of the total time within 20% reduction of the rest time. After polishing experiments, the coating roughness on the blade surface is reduced dramatically from Ra 7–8 μm to below Ra 1.0 μm. The removal of the TBCs is less than 100 mg, which is significantly less than the weight of the prepared coatings. The blade surface becomes smoothed to a mirror-like state. Originality/value The research on robotic polishing of aero-engine turbine blade TBCs is worthwhile. The real-time trajectory planning based on measuring point cloud can address the problem that there is no standard computer-aided drawing model and the geometry and size of the workpiece to be processed differ. The extraction and optimization of tool contact points based on point cloud features can enhance the smoothness of the robot movement, stability of the polishing speed and performance of the blade surface after polishing.

Study on Robotic Mobile Machining Techniques for Large Complex Components

Dynamic Cutting Force Modeling and Experimental Study of Industrial Robotic Boring

Kinematic modeling and control of mobile robot for large-scale workpiece machining

Research on the Collaborative Machining Method for Dual-Robot Mirror Milling

Novel Mode and Equipment for Machining Large Complex Components

A Robotic Milling System Based on 3D Point Cloud

A Mobile Hybrid Robot and Its Accuracy Issue in Machining of Large-Scale Structures

Trajectory Planning and Optimization for Robotic Machining Based On Measured Point Cloud

Robotic Polishing of Unknown-Model Workpieces With Constant Normal Contact Force Control

Type Synthesis and Trajectory Planning of 5-DOF Redundantly Actuated Parallel Robots with Large Output Rotational Angles for Large Workpieces

Kinematics Simulation of Adaptive Polishing Robot for Large Freeform Surface

Process Optimization for Robotic Ultrasonic Strengthening of Aviation Blade Surfaces Based on Intelligent Compliance Control

Research on Surface Tracking and Constant Force Control of a Grinding Robot

Machining of large scaled CFRP-Parts with mobile CNC-based robotic system in aerospace industry

Precise and smooth contact force control for a hybrid mobile robot used in polishing

Modeling, Planning, and Control of Robotic Grinding on Free-Form Surface Using a Force-Controlled Belt Grinding Tool

A Robotic Polishing Trajectory Planning Method Combining Reverse Engineering and Finite Element Mesh Technology for Aero-Engine Turbine Blade TBCs

Teleoperation mode and control strategy for the machining of large casting parts

A robotic polishing trajectory planning method for TBCs of aero-engine turbine blade using measured point cloud

Conceptual Design and Kinematic Optimization of a Gantry Hybrid Machining Robot

Development and Polishing Process of a Mobile Robot Finishing Large Mold Surface