Abstract:In this article, an innovative manufacturing system based on a dual-arm robot, each arm with five degree-of-freedom (DOF), is proposed. Although the proposed system can work in the automation mode or machining mode, only the function of machining is studied here. In this case, the system is equivalent to a five-axis machine tool. The method of equivalent errors is employed to design a robust contouring controller. It is shown that reducing the equivalent contour error in the joint space is equivalent to reducing both position contour error and tool orientation error in the task space. As a comparison, a conventional distributed controller is also designed. Several cases of experiments have been conducted, including a circular path with four different feedrates and an elliptic path. The experimental results show that the proposed method can achieve much better results in all cases, and demonstrate the feasibility of adopting the dual-arm robotic system for machining task. Note to Practitioners—This article was motivated by the traditional manufacturing system that is a cooperation between computer numerical controlled (CNC) machine tool(s) and robot arm(s). This article proposes a novel usage of a dual-arm robot with a fixed spindle and cutting tool in order to integrate the main functions of the CNC machine and robot arm together. This system alone can perform machining and automation tasks, which can significantly reduce the overall cost of a manufacturing system. The existing dual-arm robots have seldom been designed to perform machining tasks. For machining, a contouring controller is necessary and is proposed in this article. This model-based contouring controller relies on the accurate system parameters to achieve high precision machining. For example, the mass and inertia changes of a workpiece during machining should be considered. This issue will be addressed in our future research.

Teleoperation mode and control strategy for the machining of large casting parts

Enhancing Robot Teleoperation in Remote Automation Production Through an Event-Triggered Control Strategy

Liberating Humanity from Heavy Labor: Dual-Arm Coordination and Teleoperation Control for an Assistive Robot

Research on the Collaborative Machining Method for Dual-Robot Mirror Milling

Grinding/Cutting Technology and Equipment of Multi-scale Casting Parts

Modeling and Control of General Hydraulic Excavator for Human-in-the-loop Automation

Adaptive Real-Time Predictive Compensation Control For 6-Dof Serial Arc Welding Manipulator

Dynamical Obstacle Avoidance of Task- Constrained Mobile Manipulation Using Model Predictive Control

Pose and trajectory control of shield tunneling machine in complicated stratum

A Teleoperation Framework Based on Heterogeneous Matching for Hydraulic Manipulator

Unified Contact Model and Hybrid Motion/force Control for Teleoperated Manipulation in Unknown Environments

Modular Development of Master-Slave Asymmetric Teleoperation Systems with a Novel Workspace Mapping Algorithm

Novel Mode and Equipment for Machining Large Complex Components

Type Synthesis and Trajectory Planning of 5-DOF Redundantly Actuated Parallel Robots with Large Output Rotational Angles for Large Workpieces

Multitarget Adaptive Virtual Fixture Based on Task Learning for Hydraulic Manipulator

Enhanced teleoperation performance using hybrid control and virtual fixture

Kinematic modeling and control of mobile robot for large-scale workpiece machining

Design, simulation, control of a hybrid pouring robot: enhancing automation level in the foundry industry

Conceptual Design and Kinematic Optimization of a Gantry Hybrid Machining Robot

Contouring Control of an Innovative Manufacturing System Based on Dual-Arm Robot

ADAPTIVE ROBUST CONTROL OF A 7-DOFS TELEOPERATION ROBOT SYSTEM WITH PAYLOAD VARIATIONS AND DISTURBANCES