Abstract:Hydrogen-based Fuel Cells (FCs) hold significant potential as energy conversion technologies. In a previous study, we presented a pump-based hydrogen generator (PHG) that utilizes a catalytic reaction between sodium borohydride (NaBH4) powder and water. The pump circulates the water solution through the powder chamber in a closed-loop reaction. The PHG demonstrated clear advantages over alternative hydrogen sources in terms of both safety and energy density. However, as operating time increases, the solution in the closed-loop PHG becomes saturated, causing the reaction rate to decline. This limitation can be overcome in cases where an external water source is available, such as marine vehicles, drones equipped with water recovery systems from their fuel cells, or systems located near pipelines. In such scenarios, introducing freshwater feeding and product emission offers intriguing possibilities for significantly enhancing the fuel's energy density and extending its effective operation time. Our current research introduces an innovative concept: a dual-cycle generator (DCG) that effectively overcomes the issue of solution saturation over time. It achieves this by combining solution circulation with freshwater feeding and product emission. Our study employed a DCG prototype to examine various operating modes and to demonstrate the effectiveness of this approach. The DCG achieved a calculated energy density for the fuel of 3868 Wh/kg, with 93% H2 extraction yield from the powder. Our findings reveal substantial improvements in terms of extended operation duration (81%), increased hydrogen flow rate (36%), enhanced energy density (33%), and improved H2 yield extraction from the powder (39%). This methodology holds promise for mobile applications or off-grid systems situated in proximity to a water source.

A Novel Energy Conversion Technology Based on Sodium Borohydride as an Energy Carrier

A Review: Hydrogen Generation from Borohydride Hydrolysis Reaction

Development of the direct borohydride fuel cell

Solid sodium borohydride as a hydrogen source for fuel cells

Recent Advances in the Use of Sodium Borohydride As a Solid State Hydrogen Store

A Fuel Cell Development for Using Borohydrides As the Fuel

A review on hydrogen generation from the hydrolysis of sodium borohydride

ChemInform Abstract: Solid Sodium Borohydride As a Hydrogen Source for Fuel Cells.

Current status and progress of direct borohydride fuel cell technology development

Development of high-performance planar borohydride fuel cell modules for portable applications

A novel integrated energy systems combining methanol reformed fuel cell with sodium ion battery

Research on Battery Technology of Borohydride New Hydrogen Energy Material

Enabling Full Conversion Reaction With High Reversibility To Approach Theoretical Capacity For Sodium Storage

Advances in boron nitride‐based materials for electrochemical energy storage and conversion

Hydrolysis and Regeneration of Sodium Borohydride (nabh 4 ) – A Combination of Hydrogen Production and Storage

Low-cost Method for Sodium Borohydride Regeneration and the Energy Efficiency of Its Hydrolysis and Regeneration Process

Fuel Cell Power Source Based on Decaborane with High Energy Density and Low Crossover

Research progress on catalysts for hydrogen generation through sodium borohydride alcoholysis

Advances and Outlook of Boron–Hydrogen Containing Materials for Potential Clean Energy Applications: A Review

A novel micro-reactor for hydrogen production from solid NaBH4 hydrolysis in a dual-cycle methodology

Achieving a novel solvent-free regeneration of LiBH4 combining hydrogen storage and production in a closed material cycle