Abstract:We present a system-on-chip (SoC) that integrates a TMS320C54x digital signal processor (DSP), which is commonly used in cellular phones, with a multigigahertz digital RF transmitter that meets the Bluetooth specifications. The RF transmitter is tightly coupled with the DSP and is directly mapped to its address space. The transmitter architecture is based on an all-digital phase-locked loop (ADPLL), which is built from the ground up using digital techniques and digital creation flow that exploit high speed and high density of a deep-submicrometer CMOS process while avoiding its weaker handling of voltage. The frequency synthesizer features a wideband frequency modulation capability. As part of the digital flow, the digitally controlled oscillator (DCO) and a class-E power-amplifier are created as ASIC cells with digital I/Os. All digital blocks, including the 2.4-GHz logic, are synthesized from VHDL and auto routed. The use of VHDL allows for a tight and seamless integration of RF with the DSP. To take advantage of the direct DSP-RF coupling and to demonstrate a software-defined radio (SDR) capability, a DSP program is written to perform modulation of the GSM standard. The chip is fabricated in a baseline 130-nm CMOS process with no analog extensions and features high logic gate density of 150 kgates per mm2. The RF transmitter area occupies only 0.54 mm2, and the current consumption (including the companion DSP) is 49 mA at 1.5-V supply and 4 mW of RF output. This proves attractiveness and competitiveness of the “digital RF” approach, whose goal is to replace RF functions with high-speed digital logic gates.

Design of a Configurable Circuit for Bluetooth

20 . 6 A 0 . 6 V 32 . 5 mW Highly Integrated Receiver for 2 . 4 GHz ISM-Band Applications

Front-end Integrated Circuit Design for Bluetooth Receiver

A Reconfigurable Analog Baseband Circuit for Wlan, Wcdma, and Bluetooth

A SC-based Novel Configurable Analog Cell

A Reconfigurable Multi-Mode Multi-Band Transmitter with Integrated Frequency Synthesizer for Short-Range Wireless Communication

A 1.8-V, 5-Ma Reconfigurable Analog Baseband Circuit for Low-if Multi-Mode Multi-Band Receivers

Design and Realization of Automatic-controlled Device of Radio Based on Bluetooth

A Class-C Lc Vco For 802.11 Bigin And Bluetooth

SoC with an integrated DSP and a 2.4-GHz RF transmitter

A Low Power Speed-configurable SoC Supporting Enhanced IEEE 802.15.4 Standard Digital Baseband Chip Design

The design of a compact LTCC balanced filter for Bluetooth applications

Digital RF processing: toward low-cost reconfigurable radios

Design Of A Configurable System-On-Chip For Audio Application

DSP-coupled 2.4 GHz RF transmitter in 130 nm CMOS

A Reconfigurable Sliding-IF Transceiver for 400 MHz/2.4 GHz IEEE 802.15.6/ZigBee WBAN Hubs With Only 21% Tuning Range VCO

Design Of A Compact Wireless Multi-Channel High Area-Efficient Stimulator With Arbitrary Channel Configuration

Design of a binary programmable transmitarray based on phase change material for beam steering applications in D-band

A Wideband Digital Attenuator Based on Conductive Bridging Random Access Memory Switches for RF System-in-Package

2-MHz CMOS Limiting Amplifier/RSSI for Bluetooth system

A Configurable Active-Rc Filter for Half-Duplex Transceiver