Abstract:The pipelined-SAR ADC has become popular in wide-bandwidth and high-resolution applications due to its power-efficient architecture [1]. In the pursuit of higher ADC speeds while maintaining precision and power efficiency, not only does the conversion time of the SAR sub-ADC need to be shortened, but also the speed and gain of residue amplifiers (RA) need to be enhanced. Conventional solutions to these two problems, including reducing the bit-cycling time of the SAR and increasing the RA bandwidth, often require extensive power costs, leading to a degraded power efficiency. To address the speed and gain challenges, three techniques are proposed in this work. First, a continuous-time SAR-assisted detect-and-skip (CTDAS) to parallelize the MSB conversion with ADC sampling, thus cutting down the $1^{\text{st}}$-stage sampling and conversion time by 35% when compared with a conventional detect-and-skip (DAS) technique. Second, an open-then-close correlated level shifting (OCCLS) technique applied in the residue amplifier, which significantly speeds up the first phase by open-loop amplification reusing the first two high-bandwidth stages of the RA. With the aid of a detect-and-cut loop, an optimal voltage gain in the first phase is obtained across PVT variations, thus realizing an >80dB equivalent RA open-loop gain $\left(\mathrm{A}_{\mathrm{EO}}\right)$ across PVT variations. Third, a hybrid static-floating ringamp architecture is implemented to improve the noise performance of the RA and to fit in well with the OCCLS scheme. Thanks to the techniques above, the 22nm prototype achieves 70.7dB SNDR under 200MS/s while consuming 2.0mW from a 0.9V supply. It measures a best energy efficiency of 177.7dB Schreier FoM with fs >150MS/s.

Design of a Time-Interleaved Low Power Pipelined SAR ADC

Low power design for 14-bit 100MSPS pipelined ADC

Design of an 8-Channel 12bits 1MSPS SAR ADC

A 1.5 Mw 68 Db SNDR 80 Ms/s 2<formula Formulatype="inline"> <tex Notation="TeX">$\times$</tex></formula> Interleaved Pipelined SAR ADC in 28 Nm CMOS

A 14-Bit 500-Ms/s Pipelined-SAR ADC in 28-Nm CMOS with Foreground and Background Calibration

A 12-Bit 2.32gs/s Pipelined/sar Hybrid ADC with a High-Linearity Input Buffer.

A 12-bit 100-MSps pipelined-SAR ADC with a time-interleaved second-stage

Design of a Novel 8-Bit 0.35-&Amp;#x00b5;m BiCMOS Pipelined ADC

A Low-Power 12-Bit 2gs/S Time-Interleaved Pipelined-Sar Adc In 28nm Cmos Process

An energy-efficient reconfigurable 18/12-bit 1MS/s pipelined-SAR ADC

A 150 MS/s 10-Bit CMOS Pipelined Subranging ADC with Time Constant Reduction Technique.

A 14-Bit 200ms/s Low-Power Pipelined Flash-Sar ADC.

A 12-Bit 1.5-Gs/s Single-Channel Pipelined SAR ADC with a Pipelined Residue Amplification Stage

A 1.8-V 11-Bit 40-Ms/s 21-Mw Pipelined ADC

A 12-bit 1.1GS/s Pipelined-SAR ADC With Adaptive Inter-Stage Redundancy in 28 nm CMOS

A power-efficient 14-bit 250MS/s pipelined ADC

A 12bit 800ms/s Time-Interleaving Pipeline ADC in 65nm CMOS

A Time-Interleaved SAR Assisted Pipeline ADC with a Bias-Enhanced Ring Amplifier.

A 14b 200MHz power-efficient pipelined flash-SAR ADC

9.1 A 2mW 70.7dB SNDR 200MS/s Pipelined-SAR ADC with Continuous-Time SAR-Assisted Detect-and-Skip and Open-then-Close Correlated Level Shifting.

A 14bit 10msps Low Power Pipelined ADC with 0.99pj/step FOM